I'm not very tech savvy so apologies if this seems obvious! I need to play samples probably about 6 or 7 in total when playing live. Usual things such as song intros, speech etc. Most stand alone samplers are way to expensive just to justify shelling out for one.
Can I do this on the E6 and would it have enough memory for 6 or 7 mp3 samples? I Guess I would assign each sample to a program in the synth section? I am really tech dumb.....
Thanks
MT
38 posts
• Page 1 of 4 • 1, 2, 3, 4
Re: Using Electro 6 to play samples?
Hi,
memory availability depends on how much you loaded into the sample area of your Electro 6. The Nord Sound Manager will tell you how much space is available right now, you may have to free up some space if it's not sufficient for the new samples you would like to load.
As for the samples you want to create yourself: you would first have to record the parts into a .wav file on your computer, then load them into Nord Sample Editor. If you want to "fire up" a song intro, speech etc. you can assign it to a specific key in Sample Editor (I usually assign these to the most upper or lower keys on the keyboard which are the ones less used when playing), means pressing this key will play the .wav file assigned to it. You can assign different .wav files to different keys in a single sample . After that you export the sample from Sample Editor, load it into your Elector with Sound Manager and then assign it to a program in the synth section.
memory availability depends on how much you loaded into the sample area of your Electro 6. The Nord Sound Manager will tell you how much space is available right now, you may have to free up some space if it's not sufficient for the new samples you would like to load.
As for the samples you want to create yourself: you would first have to record the parts into a .wav file on your computer, then load them into Nord Sample Editor. If you want to "fire up" a song intro, speech etc. you can assign it to a specific key in Sample Editor (I usually assign these to the most upper or lower keys on the keyboard which are the ones less used when playing), means pressing this key will play the .wav file assigned to it. You can assign different .wav files to different keys in a single sample . After that you export the sample from Sample Editor, load it into your Elector with Sound Manager and then assign it to a program in the synth section.
Last edited by Schorsch on 02 Jul 2020, 15:46, edited 1 time in total.
Regards Schorsch
Want to convert programs between NS2 and NS3?
Check this awesome website to visually view NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, NS3 88, KeyLargo, Vent II ..
Want to convert programs between NS2 and NS3?
Check this awesome website to visually view NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, NS3 88, KeyLargo, Vent II ..
- The author Schorsch was thanked by:
- monsterjazzlicks
-
Schorsch - Donator
- Posts: 2231
- Joined: 15 May 2018, 23:34
- Location: Germany - NRW
- Country:
- Has thanked: 1233 times
- Been thanked: 803 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 3
Re: Using Electro 6 to play samples?
You should also have in mind that there are various factors that determine the size of your sample instrument. So if you use a single sample with just a few seconds of a recorded sound, the sample instrument will have very small size. If you assign various samples in different keys, and those samples have a long duration then the file will be larger. I suspect that loops also increase the file size but I can not confirm this.
To give you an example, for "born to be wild" I use a harley davidson motor sound that I have assigned in a single key, I play that for a few seconds before the band comes in. The nsmp is less than 1MB. For the final countdown a have assigned a lot of samples across the keyboard to cover almost everything except the synth brass (I play that with the wave) the nsmp is almost 10MB.
To give you an example, for "born to be wild" I use a harley davidson motor sound that I have assigned in a single key, I play that for a few seconds before the band comes in. The nsmp is less than 1MB. For the final countdown a have assigned a lot of samples across the keyboard to cover almost everything except the synth brass (I play that with the wave) the nsmp is almost 10MB.
- The author alex78 was thanked by:
- monsterjazzlicks
-
alex78 - Patch Creator
- Posts: 525
- Joined: 28 Feb 2019, 01:55
- Country:
- Has thanked: 27 times
- Been thanked: 158 times
- Your Nord Gear #1: Nord Electro 4
- Your Nord Gear #2: Nord Wave
Re: Using Electro 6 to play samples?
also keep in mind that when creating custom samples, if you choose to go mono instead of stereo your file size will be halved
bless, pablo
bless, pablo
bun fyah weh fyah fi bun
- The author pablomastodon was thanked by:
- monsterjazzlicks
-
pablomastodon - Patch Creator
- Posts: 4389
- Joined: 30 Apr 2010, 20:45
- Country:
- Has thanked: 1895 times
- Been thanked: 1963 times
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave
Re: Using Electro 6 to play samples?
alex78 wrote:I suspect that loops also increase the file size but I can not confirm this.
Actually, a big reason to use loops when possible is to DEcrease file size. 10 seconds of sound take 10x the space as 1 second of sound looped to play for 10 seconds. The loop point itself is probably nothing more than a couple of bytes of data.
- The author anotherscott was thanked by:
- monsterjazzlicks
- anotherscott
- Posts: 3444
- Joined: 07 Jan 2011, 04:50
- Has thanked: 38 times
- Been thanked: 1079 times
Re: Using Electro 6 to play samples?
Thanks to all including the PMs.
One question I have that's probably more specific to the Electro 6, when I'm playing a longer sample I have to hold the key down for the duration. I know some Nord synths have a keyboard hold button which will play the sample without needing to hold the key down but the Electro 6 doesn't seem to have this function?
I am just holding the sustain pedal down which does the job but it would be nice to be able to play the entire sample by just pushing the trigger key once
One question I have that's probably more specific to the Electro 6, when I'm playing a longer sample I have to hold the key down for the duration. I know some Nord synths have a keyboard hold button which will play the sample without needing to hold the key down but the Electro 6 doesn't seem to have this function?
I am just holding the sustain pedal down which does the job but it would be nice to be able to play the entire sample by just pushing the trigger key once
- Mook Tunes
- Posts: 14
- Joined: 08 Nov 2018, 21:49
- Country:
- Has thanked: 0 time
- Been thanked: 0 time
Re: Using Electro 6 to play samples?
No, the electros don't have such feature, I use a sustain pedal as well. That would be a good addition when the E7 comes out!
-
alex78 - Patch Creator
- Posts: 525
- Joined: 28 Feb 2019, 01:55
- Country:
- Has thanked: 27 times
- Been thanked: 158 times
- Your Nord Gear #1: Nord Electro 4
- Your Nord Gear #2: Nord Wave
Re: Using Electro 6 to play samples?
I agree with that, the loop helps you make shorter samples. What I meant was if you use a sample of the same duration with or without loop may have as a result differences in size, but that difference may be just some bytes as you say.Actually, a big reason to use loops when possible is to DEcrease file size. 10 seconds of sound take 10x the space as 1 second of sound looped to play for 10 seconds.
-
alex78 - Patch Creator
- Posts: 525
- Joined: 28 Feb 2019, 01:55
- Country:
- Has thanked: 27 times
- Been thanked: 158 times
- Your Nord Gear #1: Nord Electro 4
- Your Nord Gear #2: Nord Wave
38 posts
• Page 1 of 4 • 1, 2, 3, 4
Who is online
Users browsing this forum: No registered users and 28 guests