Drawbars for house of the rising sun Vox setting? NE4sw73

[jonotownsend13]

I can't quite figure it out please someone post the drawbar numbers and which amp and whether there is drive or not.

Thanks.

[damasp]

I'm interested in this question too. When I use a Vox setting, I sometimes have trouble hearing it above or equal to other instruments. I don't want get off the OP question though.

[pterm]

Before Nord revamped their website they had a program for the electro with the settings for house of the rising sun. I did a search for it, but didn't find it just now. It's installed on my board, so I imagine I can recover it. It'll have to wait until tonight when I get home.

-pterm

[damasp]

Yes it is called Rising Sun. Its is in the Vox/Farfisa Library.

[jonotownsend13]

I can't seem to get it to work, anyone know the draw bars?

[jonotownsend13]

VX = ON
Vib/Chorus = ON (EDIT: This seems to be ON for the UPPER manual split, but OFF for the LOWER manual )
Spkr/Comp = Twin, ON
Reverb = Hall, ON

The .nepg also sets the equalizer, and the levels on the Spkr and Reverb, so I can't guess what they're at.

The drawbars
UPPER: 088800443
LOWER: 808000080

Here's a link to the location of the Vox/Farfisa library at Nord... I had some fun with this library when I first found it. There lots of organ classics' settings in it:
http://www.nordkeyboards.com/sound-libr ... sa-library

[analogika]

Doesn't the Shift-twist trick work on the Electro?

On the Stage, hold the Shift button and twist a knob to see its value without changing it.

[pterm]

Doesn't the Shift-twist trick work on the Electro?

On the Stage, hold the Shift button and twist a knob to see its value without changing it.

Neat trick, but it doesn't seem to give any indication on my Electro 3HP. I'd be happy to find out I'm wrong though.

[jonotownsend13]

Thank you so much! And it probably doesn't work on the electro because it doesn't has led for the knobs like the stage does

[jimmyjames]

The reason this file didn't work is probably that jono has an NE4 and the file posted by damasp was an NE3 file. Program files for the NE4 are tagged .ne4p while those for the NE3 are tagged .nepg. Maybe someone with technical knowledge can confirm that NE3 program files are not compatible with the NE4. Try the attached file that is for an NE4. Make sure that if you have an NE4 and want the Vox/Farfisa library that you go to the NE4 section on the Clavia web site.

You will see in another thread I am trying to start a user program file collection for the NE4. Maybe someone wants to start one for the NE3 too.