hello all,
been a while since i posted because i have simply been playing music after my initial purchase. my electro recently had a very sudden drop in volume across both output channels. it needs to be cranked to be heard and even then occasionally the volume will go away completely and then gradually come back. i've tried different amps and cables to get the basic troubleshooting out of the way, but the problem is with the nord. different sounds and patches, engines, etc. make any difference on the volume. nor does turning it on and off. i'm going to try a complete reset, but in the meantime i thought i would check out the forum - there have been a few topics, but not much to go on solution-wise. any ideas would be appreciated.
thanks in advance.
Electro 6D loss in volume
-
- Posts: 20
- Joined: 02 May 2018, 18:11
- 7
- Your Nord Gear #1: Nord Electro 6
- Has thanked: 1 time
- Been thanked: 4 times
- FZiegler
- Donator
- Posts: 2880
- Joined: 15 Dec 2019, 02:41
- 5
- Your Nord Gear #1: Nord Stage 3
- Location: Germany south-west
- Has thanked: 837 times
- Been thanked: 1002 times
- Contact:
Re: Electro 6D loss in volume
What exactly are you using as routing? Stereo/mono out? Any headphone connected? Any adapter used?
And do you have a volume pedal connected?
And do you have a volume pedal connected?
Stage-3-C (Rev.B 2.1) - Kawai VPC1 / Viscount Legend 70s / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung Tab S5e, MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars
-
- Donator
- Posts: 594
- Joined: 21 Aug 2012, 20:42
- 13
- Your Nord Gear #1: Nord Electro 3
- Has thanked: 254 times
- Been thanked: 222 times
- Contact:
Re: Electro 6D loss in volume
I recall instances in the past where volume issue occurred when a pedal was plugged into the incorrect socket. Following FZiegler's idea - disconnect all pedals when diagnosing this.FZiegler wrote:And do you have a volume pedal connected?
Re: Electro 6D loss in volume
I've had this same problem with my Stage 3 76. It even occurs when the only thing plugged in the back is a stereo out to amp/pa, with no pedal connected. Running on OS v2.62
I think it might be a bad cable.
I think it might be a bad cable.

Last edited by Woodyeyes on 11 Apr 2024, 00:10, edited 1 time in total.
Nord Stage 3 hp76, Yamaha CP300, Yamaha tenor sax, a Behringer X Air XR12 to mix keys sax and in ears, and a pair of 12” Mackie thumps to compete with noisy band mates.