Page 1 of 2

After update ...sample/synth/piano play problem

Posted: 21 Dec 2018, 19:00
by ADSRLFO
Hi

After uptading to 2.0...N3 compact

All the programs containing samples , synth/piano don't play the higest E !!!
Only the organ does...
Could you confirm ...?

Re: After update ...sample/synth/piano play problem

Posted: 21 Dec 2018, 19:05
by baekgaard
I have the HA88 (which works on all keys) so it must be a compact related problem only - hopefully someone else can confirm?

However, if there is dust in the key contacts, this is a possible symptom. Is the organ working both in high and low trigger mode?

Re: After update ...sample/synth/piano play problem

Posted: 21 Dec 2018, 20:04
by kbrkr
Does not occur on my NS3C

Re: After update ...sample/synth/piano play problem

Posted: 21 Dec 2018, 22:39
by DJKeys
No issues with mine either. Would recommend a re-installation of the current OS-

Re: After update ...sample/synth/piano play problem

Posted: 22 Dec 2018, 09:55
by ADSRLFO
That was the fix...:- )

Thanks

Re: After update ...sample/synth/piano play problem

Posted: 29 Dec 2018, 00:36
by ADSRLFO
Problem came back...

No sound from higher E from all the programs ( except organ...)
Reload the update whith no success ...:- )

What do you suggest ?

Re: After update ...sample/synth/piano play problem

Posted: 29 Dec 2018, 01:08
by analogika
Is the organ set to „high trigger“ in the system menu? If yes, it uses a different trigger contact than the pianos and synths.

Set it to „low“ and see if it triggers then. If it doesn’t, you know that there is an issue with the low trigger on that key. I’d presume that it’s dirt or dust, since it disappears and then comes back, but I obviously don’t know for sure.

Re: After update ...sample/synth/piano play problem

Posted: 29 Dec 2018, 01:51
by baekgaard
baekgaard wrote: However, if there is dust in the key contacts, this is a possible symptom. Is the organ working both in high and low trigger mode?
You never replied to this - analogika also pointed out the same point above...

Check this FIRST and let us know :-)

Re: After update ...sample/synth/piano play problem

Posted: 29 Dec 2018, 02:01
by analogika
Oops. I didn’t realise that you’d made literally the exact same point...

Re: After update ...sample/synth/piano play problem

Posted: 29 Dec 2018, 11:47
by ADSRLFO
After a night of rest ...this morning it's ok ! ? :- )
Don't know what happened..?
Hope it will stay like that !