Just finished my stand for the C2D, using old B3 legs purchased on eBay. Glued up some wood to 3" thickness. I also replaced the sides of the keyboard because the B3 legs were stained very dark and I didn't think I could successfully match the red stain. I used bed frame hardware to mount the two cross braces. The stand weighs 27 lbs. and breaks down to four pieces. There are a few rough spots I'd do differently if I ever had to. Anyway, let's see if I can upload pictures.
BC
Stand for C2
-
BC_C2D
- Posts: 16
- Joined: 21 Jan 2013, 20:14
- 12
- Your Nord Gear #1: Nord C2D
- Has thanked: 6 times
- Been thanked: 5 times
Re: Stand for C2
- Attachments
-
- 006.JPG (683.04 KiB) Viewed 9522 times
-
- 003.JPG (618.02 KiB) Viewed 9522 times
-
- 005.JPG (561.84 KiB) Viewed 9522 times
-
- 004.JPG (401.65 KiB) Viewed 9522 times
-
- 001.JPG (692.55 KiB) Viewed 9522 times
-
- 007.JPG (602.41 KiB) Viewed 9522 times
-
- 008.JPG (785.71 KiB) Viewed 9522 times
-
- 009.JPG (665.43 KiB) Viewed 9522 times
-
- 010.JPG (597.09 KiB) Viewed 9522 times
-
- 011.JPG (469.12 KiB) Viewed 9522 times
-
- 013.JPG (1.9 MiB) Viewed 9522 times
-
- 142496.jpg (17.33 KiB) Viewed 9522 times
Last edited by BC_C2D on 12 Aug 2013, 07:24, edited 1 time in total.
-
Nordlicht
- Donator
- Posts: 470
- Joined: 11 Jan 2012, 09:17
- 13
- Your Nord Gear #1: Nord Piano 5
- Your Nord Gear #2: Nord Stage 4
- Location: Germany (Schleswig-Holstein)
- Has thanked: 283 times
- Been thanked: 222 times
Re: Stand for C2
@BC_C2D:
It looks just amazing
I think there is no better way to combine "the old and the new world"...
Just perfect!
It looks just amazing
I think there is no better way to combine "the old and the new world"...
Just perfect!
Nord Piano 5 + Nord Piano Monitors, Nord Stage 4 Compact + other stuff
https://soundcloud.com/spektralfarben
https://soundcloud.com/spektralfarben
-
BC_C2D
- Posts: 16
- Joined: 21 Jan 2013, 20:14
- 12
- Your Nord Gear #1: Nord C2D
- Has thanked: 6 times
- Been thanked: 5 times
Re: Stand for C2
Thanks a lot. It ended up being a lot more work than I thought it would be when I started! 
BC
BC
-
Michael Wright
- Donator
- Posts: 236
- Joined: 03 Dec 2011, 00:14
- 13
- Your Nord Gear #1: Nord Electro 3
- Your Nord Gear #2: Nord C2
- Location: Ontario Canada
- Has thanked: 49 times
- Been thanked: 57 times
Re: Stand for C2
Nice job!! Now everyone will want you to make them one!! 
- These users thanked the author Michael Wright for the post:
- BC_C2D
-
Gustavo
- Patch Creator
- Posts: 801
- Joined: 05 Apr 2009, 18:00
- 16
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Stage 2
- Location: Monterrey, MX
- Has thanked: 142 times
- Been thanked: 167 times
Re: Stand for C2
Nice!! that's an awesome job!!
Synths: Nord Stage 2 SW, Nord Lead 4R, Vintage Vibe 64 Active, Dave Smith Instruments Pro 2, Minimoog Voyager, Prophet 6, Korg Volcas
Stand: K&M Spider Pro and Hercules X Stands
Recording: Zoom UAC-8
Speakers: EV ELXP 112-P, Event Alp 5
Stand: K&M Spider Pro and Hercules X Stands
Recording: Zoom UAC-8
Speakers: EV ELXP 112-P, Event Alp 5
-
BC_C2D
- Posts: 16
- Joined: 21 Jan 2013, 20:14
- 12
- Your Nord Gear #1: Nord C2D
- Has thanked: 6 times
- Been thanked: 5 times
Re: Stand for C2
Hope this will inspire others to take a chance and get creative. Sorry, but not looking for another "side job" especially one so time consuming. Time consuming for me because I have so little woodworking experience. I was afraid I was going to make a huge mistake the first time I drilled through the oak veneer it took me so long to glue on "just so." I made a few mistakes and went back to patch them up later. This is the first project I've ever done like this. If I can do it, anybody can do it.Michael Wright wrote:Nice job!! Now everyone will want you to make them one!!
BTW, Valhalla Woodworking sells reproduction B3 legs. They aren't cheap but sure look good. Since they're made from new wood, you won't be limited as to the color stain you go with. Their B3 legs include what would be the corners of the cabinet. This would have made construction much simpler. My B3 legs are 22" long and I added about another 5" with the tops of the stand sides.
One more thing, at first I thought about just covering the red wood sides of the C2D with veneer but the edges were rounded off so much I felt it would be difficult to get a tight fit for the veneer at the edges. So I made new wood sides covered with veneer. Then I stained the crap out of the new pieces to get them as dark as the old B3 legs.
Glad you like it.
BC
-
Spider
- Posts: 1182
- Joined: 06 Nov 2012, 12:26
- 12
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Wave
- Has thanked: 582 times
- Been thanked: 612 times
- Contact:
Re: Stand for C2
OMG!
I'm in love!!!
I thought my red C2 was cool, but this thing is breathtaking!
And looks really practical too, it will look great in your living room, but very easy to break down and carry around.
Amazing job, really!
I'm in love!!!
I thought my red C2 was cool, but this thing is breathtaking!
And looks really practical too, it will look great in your living room, but very easy to break down and carry around.
Amazing job, really!
-
Spider
- Posts: 1182
- Joined: 06 Nov 2012, 12:26
- 12
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Wave
- Has thanked: 582 times
- Been thanked: 612 times
- Contact:
Re: Stand for C2
I was wondering... in all the DIY cosmetic modification to Nords that I have read of, everyone goes to great legths to manufacture new wooden sides.
Isn't it possible to just sand off the red stain and re-paint the bare wood?
Or is the wood stained too deep, and you would have to remove too much thickness to get rid of all the red?
Not that I want to try anything like that (especially as long as the warranty is still valid!), but in the future, you never know...
Isn't it possible to just sand off the red stain and re-paint the bare wood?
Or is the wood stained too deep, and you would have to remove too much thickness to get rid of all the red?
Not that I want to try anything like that (especially as long as the warranty is still valid!), but in the future, you never know...
-
BC_C2D
- Posts: 16
- Joined: 21 Jan 2013, 20:14
- 12
- Your Nord Gear #1: Nord C2D
- Has thanked: 6 times
- Been thanked: 5 times
Re: Stand for C2
For me, the issue was how to stain existing 40 year old B3 legs already stained dark mahogany, to match the lighter red stain of the Nord. I just didn't think I could do that, so decided to make new sides for the C2D. This allowed me to put away the red sides in case I ever sold my organ. Then the buyer would have the option to use the red or not.
BC
BC