Electro 6d volume pedal for organ

Everything about the Nord Electro series; features, specifications, how to operate, and questions about technical issues.
Post Reply
Pedda
Posts: 2
Joined: 13 Oct 2022, 11:14
3
Your Nord Gear #1: Nord Electro 6
Germany

Electro 6d volume pedal for organ

Post by Pedda »

Hello, everyone.
I am new to the forum and getting to know my Electro 6d. I would like to add to the piano sound an organ sound by volume pedal. How do I connect the pedal respectively how do I use the control pedal input?
I have two pedals available: a KORG KVP-001 and a BOSS FV-300L.
Thank you in advance for your tips!
Pedda
User avatar
maxpiano
Patch Creator
Posts: 7340
Joined: 27 Jun 2011, 13:29
14
Your Nord Gear #1: Nord Stage 3
Location: Italy
Has thanked: 563 times
Been thanked: 2577 times
Italy

Re: Electro 6d volume pedal for organ

Post by maxpiano »

Hi and welcome to NUF

The two pedals you mention are volume pedal, intended for analog audio signals, while for keyboards like NE6D you need an Expression pedal (see NE6D manual for recommended/supported models like Yamaha FC7 or Roland Ev5)

Nevertheless also a volume pedal can be adapted to be used as an expression pedal, in some cases, depending on type and value of its pot (expression pedals typically are 10-40 KOhm linear, volume pedals may be logarithmic and different values); to do that you need Y cable (2x mono jacks -> 1 stereo jack, you will connect the stereo side to the NE6D CtrlPedal input and the 2 mono jacks 1 to the Input and the other to the Output of the volume pedal (you may need to try which combination works i.e. swap teh 2 mono jacks until it works).

Having said that, since even a cheap Maudio EX-P expression pedal works with NE6D, unless you already have a Y cable to try with your pedals I would consider buying a specific expression pedal.

EDIT: I found the manual of FV300L and actually with a stereo (TRS) jack cable you can use it as Expression pedal, so to use it with NE6D you just need a stereo jack connected between its EXP1 output and NE6D CtrlPedal input. https://www.zikinf.com/manuels/boss-fv- ... -44086.pdf :thumbup:

To learn settings related to CtrlPedal input refer to NE6D manual (System menu + how to enable it on Piano/synth section and FX1, Organ uses it by default).
Last edited by maxpiano on 15 Oct 2022, 12:04, edited 6 times in total.
Pedda
Posts: 2
Joined: 13 Oct 2022, 11:14
3
Your Nord Gear #1: Nord Electro 6
Germany

Re: Electro 6d volume pedal for organ

Post by Pedda »

This was pretty easy! It works!
Thank you very much, maxpiano!
michaelmh
Posts: 1
Joined: 05 Mar 2023, 18:18
3
Your Nord Gear #1: Nord Electro 6
Germany

Re: Electro 6d volume pedal for organ

Post by michaelmh »

Hi Pedda,
I understood you want to use the pedal to add organ to the piano sound.
In my experience the expression pedal simulates a "swell pedal" which does not turn off the organ sound completely. Is that okay for you, or did you find a way to get the organ sound to zero?
Thanks a lot!
stefmazurier
Posts: 28
Joined: 27 Sep 2012, 22:40
13
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Electro 3
Been thanked: 1 time
France

Objet : Pédale de volume Electro 6d pour orgue

Post by stefmazurier »

Bonjour, je n'arrive pas non plus, à descendre à 0 avec la pédale.
Quelqu'un a-t-il une idée ?
Merci d'avance.
:keyboard2:
Post Reply