Hi everyone
I wanted to report a problem I encountered with a north stage 3
When I send a program change from an ipad connected in midi to change the program and I operate the volume pedal, the program that is selected from the keyboard is often not the one set by my ipad ... if I don't touch the pedal everything works fine.
This thing is very annoying as I can find myself in live programs other than those set on ipad
Anyone have any solutions?
Hello
Adam John
Program change and volume problem with midi
-
FZiegler
- Donator
- Posts: 2880
- Joined: 15 Dec 2019, 02:41
- 5
- Your Nord Gear #1: Nord Stage 3
- Location: Germany south-west
- Has thanked: 837 times
- Been thanked: 1002 times
- Contact:
Re: Program change and volume problem with midi
What exactly do you mean by 'volume pedal'? Is it the control or the swell pedal that bothers your program changes? Interesting, besides!
Last edited by FZiegler on 08 Apr 2022, 16:48, edited 1 time in total.
Stage-3-C (Rev.B 2.1) - Kawai VPC1 / Viscount Legend 70s / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung Tab S5e, MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars
-
giotast
- Posts: 8
- Joined: 26 Nov 2012, 19:47
- 12
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Lead A1
- Has thanked: 1 time
- Been thanked: 1 time
Re: Program change and volume problem with midi
The volume pedal is connected to a master and transmits a CC 7 midi signal to stage 3 via ipad with camelot pro
if I change a scene from the pads by sending a program change to the stage while I am moving the volume pedal the program change transmitted to the keyboard is sometimes wrong ... which does not happen if I do not touch the volume pedal
if I change a scene from the pads by sending a program change to the stage while I am moving the volume pedal the program change transmitted to the keyboard is sometimes wrong ... which does not happen if I do not touch the volume pedal
Last edited by giotast on 08 Apr 2022, 17:04, edited 1 time in total.
-
maxpiano
- Patch Creator
- Posts: 7068
- Joined: 27 Jun 2011, 13:29
- 14
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 537 times
- Been thanked: 2479 times
Re: Program change and volume problem with midi
To exclude you have some incorrect mapping in Camelot or the master, check with the MIDI Monitor of Camelot (the Layer that commuinctase with NS3) what it is actually receiving and then sending to the NS3 when you do that.giotast wrote:The volume pedal is connected to a master and transmits a CC 7 midi signal to stage 3 via ipad with camelot pro
if I change a scene from the pads by sending a program change to the stage while I am moving the volume pedal the program change transmitted to the keyboard is sometimes wrong ... which does not happen if I do not touch the volume pedal
Last edited by maxpiano on 08 Apr 2022, 17:25, edited 2 times in total.