Download Error in the Nord Sample Editor

[saugurke007]

Hello,
i tryed using the nord sample editor 3. I connected my Nord Electro 4, dragged an .wav file and pressed save and transfer to nord. That doesnt work and it says: Donload Error, please transfer to Instrument.
I dont know what to do.
Thanks for the help and greetings from Germany,
Ede

(i attached an picture from the sample editor)

[maxpiano]

HI, welcome to NUF

I think you need to config NSE to send .nsmp V2 (the format accepted by NE4)

Check this https://www.nordkeyboards.com/support/m ... pleeditor3

Compatibility and formats
The Nord Sample Editor 3 is capable of generating two different output formats for sample instruments: NSMP 3 (.nsmp3) or NSMP 2 (.nsmp). There are a few limitations as to what features are supported by the NSMP 2 format:

Silent zones are not supported in the NSMP 2 format. In these instances, the closest sample above the silent zone will instead be stretched down.
Combining Loop and Fade Out is not supported in the NSMP 2 format. In these cases the Loop will be used but not the Fade Out.
“Config” provides a setting for Default Output Format for sample instruments. This setting is used when no Nord is connected and its options are NSMP 2 and NSMP 3. Choose the appropriate format according to the compatibility lists below.

NSMP 3 Instruments
Nord Stage 3
Nord Electro 6
Nord Piano 4
Nord Grand
Nord Wave 2

NSMP 2 Instruments
Nord Stage 2 / 2EX
Nord Electro 5
Nord Electro 4
Nord Electro 3
Nord Electro 3HP
Nord Piano 3
Nord Piano 2
Nord Wave