New EPs Dyno

[SOULidarity]

Hi - I downloaded a new new EP to my stage and want to try out the dyno settings, but I cant seem to get anything happening there. I have no silkscreen near my EQ settings indicators, but I assume if you press the EQ button a 4th time, the top two LEDs will light, indicating Dyno 1? This doesn't happen for me. Someone mentioned a reset piano? Not sure of the steps there. Anything else? Thanks

[analogika]

E-Pianos Version 6 and OS Version 2.00?

[cphollis]

E-Pianos Version 6 and OS Version 2.00?

and currently only on a Stage 3.

[23skidoo]

You need to make sure the presets you're playing use the version 6 sounds you downloaded - you can have both those and the version 5's installed at the same time, so make sure you're linked to the right one, or you won't have those options.

In sound manager, you can "swap" the version 5 pianos for the version 6 (and change sizes while you do it, if you want, say from L to XL) and that will rewire all the patches that used the old version to the new one for you. You can do this with either preloaded samples (just choose the sample again in the upload dialogue and it will realize it's already uploaded and use that one) in which case it will simply relink and remove the old version, or with samples you haven't yet downloaded to the keyboard, in which case it will transfer and relink.

[SOULidarity]

Thanks I used the sound manager to swap the new with the old nefertiti and am using 2.0. SO I should be seeing the two LEDs light when in Dyno mode?

[Schorsch]

Yes, when you step through the EQ pressing the button several times you will first see each LED working separately an then two LEDs in combination,