Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Post by **WannitBBBad** » 25 Oct 2021, 15:31

Hi everyone, I hope all of you are doing well. Periodically I'll see a post where someone would like to have the B3 on one panel not use the same Leslie/Reverb effect as the B3 on the other. As the Stage 3 is programmed to utilize just one Leslie/Reverb setting (can't have a fast Leslie on Panel A and a slow Leslie on Panel B), I put together an easy work-around that uses the Chorus and Stereo Pan effect in place of the slow Leslie for one panel; the reverb on the B3 can also be set differently than what's used on the panel with the Leslie. For those playing in mono, I would suggest replacing the Stereo Pan effect with a Tremolo effect set lightly and at the same slow rate as the Chorus effect. I hope this comes in handy for some of you. Take care.

B3 NoLeslieLeftW.ns3f: (592 Bytes) Downloaded 258 times

B3 - Chorus-Stereo Pan and Fast Leslie.mp3

Post by **ericL** » 25 Oct 2021, 16:20

Very nice! I haven't experimented much with things like this and I wonder what might be possible in my scenario where I'm using a Ventilator almost exclusively for all of my organ sounds via Output 3. What I've seen is that if I turn the NS3 internal Leslie sim back on, it basically overrides the external sim and puts the organ sound back into Outputs 1 and 2. Not sure if there's a setting somewhere that might allow me to use one panel of organ through Output 3 into Vent, while the other panel is routing through the internal Leslie. Basically giving me the ability to have two Leslies doing different things. I don't believe it's possible. It does seem like I should experiment more with things like the sound posted above. Thanks for sharing!

Post by **WannitBBBad** » 25 Oct 2021, 16:55

ericL wrote:Very nice! I haven't experimented much with things like this and I wonder what might be possible in my scenario where I'm using a Ventilator almost exclusively for all of my organ sounds via Output 3. What I've seen is that if I turn the NS3 internal Leslie sim back on, it basically overrides the external sim and puts the organ sound back into Outputs 1 and 2. Not sure if there's a setting somewhere that might allow me to use one panel of organ through Output 3 into Vent, while the other panel is routing through the internal Leslie. Basically giving me the ability to have two Leslies doing different things. I don't believe it's possible. It does seem like I should experiment more with things like the sound posted above. Thanks for sharing!

You're welcome! LeftyBass68 posted that he splits the panels like you mention at LINK--> nord-stage-forum-f3/reverb-for-hammond- ... ml#p147353

Post by **florence** » 25 Oct 2021, 17:29

very smart !

wanted already to do that in the past but was not able to find a solution as the Leslie is unique...., but your workaround is great in this case

Thanks !

cphollis · Post by **cphollis** » 26 Oct 2021, 04:55

That's a very pretty sound.

Post by **WannitBBBad** » 01 Nov 2021, 14:15

I always see what I can do with the internal sound capability of the Stage 3 before turning to using samples, but another possibility of having two distinctly different B3/Leslie/Reverb setups is throwing a B3 sample into the mix. Using the B3/Leslie on both panels (panel A reverb used for both), one can also add a third B3 (sample) on panel B using that reverb. I have quite a few B3 samples posted at nord-user-samples-nsmp-samples-f14/hamm ... 21307.html that have the Leslie incorporated into the sample if you ever want to try it. An example of three of the samples with a slow Leslie is below. Take care everyone.

B3 888 888632234 888686868 LS.mp3

toryeatmon · Post by **toryeatmon** » 03 May 2022, 02:01

Hey! Mine is saying "Sample Not Found". Could you let me know which instruments you're using for everything so I Could download them?

Post by **WannitBBBad** » 03 May 2022, 03:27

toryeatmon wrote:Hey! Mine is saying "Sample Not Found". Could you let me know which instruments you're using for everything so I Could download them?

Hello, I'm sorry for the trouble, the preloaded Fender Precision sample #126 was used by another version of this program but isn't needed for this one. A handy tool if you get this error again: the NS2 and NS3 Program Viewer, posted at nord-stage-forum-f3/ns3-program-viewer-t19939.html will allow you to view all parameters of any Stage 2 or Stage 3 program. Attached is a PDF of the output with info showing that I had sample 126 "Fend Prec Direct ST Mono 3.0" loaded but not used. Similarly, the pianos not used are White Grand Lrg and BlueSwede Lrg. Take care.

Nord User Forum

Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right

Re: Hammond B3 - Chorus/Stereo Pan on Left, Leslie on Right