I've always loved this song so bit the bullet and programmed the following starting from a post by Buisbird and Africa_split sample by rudiratlos (Thank you!). I haven't ever played this out but learned a few parts for the demo mp3s below. I hope you like these - take care.
Sounds needed: Marimba in Piano Section, Africa_split.nsmp3 sample, Flute Sample for Solo, White Grand (or link one you like). Marimba available at the Nord site:
https://www.nordkeyboards.com/sound-lib ... us/marimba
Program "Toto Africa p1 W": This program is used for the Intro, First Verse and End, with synth brass/marimba on left and Africa_split sample/marimba on right. The filter for the brass is morphed to both the Mod Wheel and Aftertouch - the MW allows for nice adjustment if you want the sound a little brighter and AT is used at the end of the verse (listen to end of mp3). The Marimba in the piano section is used for both slots, and the delay effect is set at a tight slapback to sound like multiple players. The sample and Marimbas are morphed to the control pedal to pull them out of the mix during the verse. For those of you limited on sample space, I've added a second program "
Toto Africa p1bW" using the Kalimbas that are pre-loaded in the Stage 3 - the high end could be tweaked a little.
- Toto Africa p1 W.ns3f
- Stage 3 Program for "Africa" by Toto - Intro using "Africa_split.nsmp3" sample
- (592 Bytes) Downloaded 1159 times
- africa_split.nsmp3
- Sample with synth and kalimbas for "Africa" by Toto
- (2.17 MiB) Downloaded 864 times
- Toto Africa p1bW.ns3f
- Stage 3 Program for "Africa" by Toto - Intro using Nord Kalimba sample
- (592 Bytes) Downloaded 960 times
Program "Toto Africa p3 W": This program is used for the 2nd verse where brass is on the left and mono synth is on the right. The White Grand is blended in a little for the 2nd verse as well.
- Toto Africa p3 W.ns3f
- Stage 3 Program for "Africa" by Toto - Used for second verse with brass left (marimbas on control pedal) and solo synth right
- (592 Bytes) Downloaded 863 times
Program "Toto AfricaSoloW": This program uses the Flute sample with OSC2 added with a synth Sine wave, and Marimbas from the piano section added using the Control Pedal. I found it easier to duplicate the sounds and set up a split for left and right hands. The delay effect is set at a tighter slapback than the intro but not as heavy so it wouldn't sound like sloppy playing

For those of you who would prefer to play the part with your hands overlapping in the same split so you could set up another part on the keyboard as well, I also have "
Toto AfricaSol2W" posted that also uses the Africa sample. I really like the Flute sample (sounds great on "Can't You See" by Marshall Tucker too) but you can try others already preloaded in the Stage 3 if you lack the space.
- Toto AfricaSoloW.ns3f
- Stage 3 Program for "Africa" by Toto - Solo with Marimba/Flute - left and right hands on separate splits
- (592 Bytes) Downloaded 883 times
- Flute.nsmp3
- Flute sample - Africa - Can't You See - others
- (4.89 MiB) Downloaded 723 times
- Toto AfricaSol2W.ns3f
- Stage 3 Program for "Africa" by Toto - Solo with Marimba/Flute - left and right hands together
- (592 Bytes) Downloaded 839 times
Program "Toto Africa Ch W": This program is used for the chorus. The MP3 is of the ending chorus where I used the Control Pedal to bring in more piano, second synth, and slight B3 - you can mix those to your taste.
- Toto Africa Ch W.ns3f
- Stage 3 Program for "Africa" by Toto - Chorus - Piano, 2nd synth, and B3 on Control Pedal
- (592 Bytes) Downloaded 860 times
My post covering 100+ Programs
nord-stage-3-programs-ns3p-ns3pb-files- ... 15748.html