Page 1 of 1
FONT NORD
Posted: 24 Jun 2014, 13:36
by MARDELNORTE
Hello anyone know the font that uses nord?
Re: FONT NORD
Posted: 26 Jun 2014, 17:34
by Marlowes
No, I have been googling and searching for a while but not found any really good clue to the answer.
Several tries have been made, but none seem to have found the right one.
My conclusion right now is that Clavia have re-designed an existing font/typeface to their own needs ... Sadly enough for us.
But the design and redness is a major factor to their great success.
Re: FONT NORD
Posted: 27 Jun 2014, 00:31
by pablomastodon
there is no such font -- letters are custom designed on an as-needed basis
pablo
Re: FONT NORD
Posted: 28 Jun 2014, 01:45
by OBDave
Re: FONT NORD
Posted: 28 Jun 2014, 09:16
by Marlowes
Wow! I'm impressed! Thanks a lot!
I will use this as a base for my "
Nord Lead 2X is the greatest synth ever"-T-shirt!
Some letters just need a little tiny tweaking. Nice task for a rainy day ...
Re: FONT NORD
Posted: 01 Jul 2014, 08:41
by Merlimau
I assume it’s a slightly modified Steiner font:
http://www.fontspace.com/gabriele-magurno/steiner
Merlimau
Re: FONT NORD
Posted: 01 Jul 2014, 14:14
by MARDELNORTE
Thank you!!
Re: FONT NORD
Posted: 25 Apr 2022, 20:43
by tominaz
I realize this is an old thread, but I'm making a 3D Revit Family of my Nord stage 3 HP76 and made the Nord logo. The trick I used was to download the Nord Stage 3 manual as a PDF from Nord website. Page 1 of the manual has the Nord Stage 3 as outlines in the PDF. I extracted page 1, brought it into AutoCAD, exported the resulting DWG, imported DWG into a Revit Generic Model family and did a 3D extrusion using DWG outline as picking points. I'm sure it is off a tad bit but worked great for me. Tom
EDIT: Added the converted exports in PDF, EPS, and DXF formats in the Zip File
Use at your own risk as conversions may have some small errors vs the official Clavia Corporate Graphics Department version.
Re: FONT NORD
Posted: 26 May 2025, 13:01
by ouchtor
tominaz wrote: ↑25 Apr 2022, 20:43
I realize this is an old thread, but I'm making a 3D Revit Family of my Nord stage 3 HP76 and made the Nord logo. The trick I used was to download the Nord Stage 3 manual as a PDF from Nord website. Page 1 of the manual has the Nord Stage 3 as outlines in the PDF. I extracted page 1, brought it into AutoCAD, exported the resulting DWG, imported DWG into a Revit Generic Model family and did a 3D extrusion using DWG outline as picking points. I'm sure it is off a tad bit but worked great for me. Tom
EDIT: Added the converted exports in PDF, EPS, and DXF formats in the Zip File
Use at your own risk as conversions may have some small errors vs the official Clavia Corporate Graphics Department version.
You can right-click any product name on Nord's website and save it as an .SVG!