Page 1 of 1
Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 17:49
by Zeppi3
Hello,
my question is maybe primitive..? But my Electro 6D is a new experience for me.
Ist this setting possible?:
- left bass from the s-engine
- right a piano and a sound from e-engine again
?
A split with bass and just one instrument is quite poor in my opinion. I know, the organ. But I prefer strings or pads.
What can I do? Buy another instrument?
Best regards
Thomas from Berlin
Sorry for my bad English...I was quite lazy at school...
Re: Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 17:53
by Schorsch
Hi and welcome to this forum!
splitting the keyboard is simple and well outlines in the user manual of the Nord Electro 6. However, if you want to use 2 different sounds from one of the Electro 6 engines like the synth engine (sound A on the left, sound b on the right) you would need 2 of the respective engines in parallel, which a Nord Elector does not provide. This is available from the Nord Stage series.
Re: Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 17:57
by Zeppi3
Hi,
Thank You for the fast response.
Than ist the help from Chris (attachment) not right?
Re: Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 18:01
by Schorsch
From what I know the Electro does not allow using two different sounds from one of the engines at a time, but I may be wrong concerning the current Electro 6 which I am not using, so maybe others who own the Electro 6 can help clarifying this.
DId you read the user manual of the Electro? If not I strongly encourage you to do so, Nord's manual are very good and you will get a deep understanding of the capabilities and handling
Re: Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 18:05
by Zeppi3
The user manual is very small in my opinion. They explain layering and splitting. But not very deeply...
Re: Split with two sounds from sample/synth engine
Posted: 08 Nov 2025, 18:10
by Zeppi3
Thank You