Page 1 of 1
Nord C2 and Leslie
Posted: 01 Sep 2023, 15:10
by Bertvdlast
Can i use a MIDI cable to control my Leslie 2101 with my Nord C2?
Re: Nord C1 and Leslie
Posted: 01 Sep 2023, 15:13
by maxpiano
More a question to ask Hammond or look into the 2101 manual, the MIDI CC that C1 sends related to Rotary is anyway documented on its manual (MIDI Controllers List) but they cannot be changed.
Rotary speed: CC 82 (sent on Upper MIDI channel)
PS: I see that you can configure some MIDI CCs on the 2101 System Parameters, like Leslie mode (Slow/Fast/Brake) but this does not guarantee compatibility as values expected may be different.
Re: Nord C2 and Leslie
Posted: 04 Sep 2023, 04:43
by LeftyBass68
C2D will control a Leslie 722 (11 pin) just fine.Slow/Fast buttons,Stop etc. all function.Half Moon switch also floor switch,whatever you need to control a mechanical Leslie.
Re: Nord C2 and Leslie
Posted: 04 Sep 2023, 09:07
by maxpiano
LeftyBass68 wrote:C2D will control a Leslie 722 (11 pin) just fine.Slow/Fast buttons,Stop etc. all function.Half Moon switch also floor switch,whatever you need to control a mechanical Leslie.
Good point, with 11pin connection in fact all should work fine, but the OP asked explicitly to control the 2101 via MIDI (not sure why, the 11pin should be the preferred way, also imho)