Page 1 of 1
NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 13:33
by WannitBBBad
Posing on behalf of cavstef:
cavstef wrote:
Good morning everyone.
The problem I encountered several times concerns the pedal (Yamaha Fc7) used as an expression pedal to increase the volumes I want. It has happened several times that by pressing slowly, the pedal immediately switches from 0 to 100%. So I'm forced to go back to the Program/Pedal section to set the Yamaha FC7 pedal and then it returns correct.
Re: NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 13:44
by WannitBBBad
Do you have another control pedal you can test on the NS4? When moving the pedal slowly, does it stay at 0 for some movement before jumping to 100% or start to register some value and then jump to 100%? Thanks
Re: NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 15:50
by zippo
I have the same problem with a boss pedal. It is a bug which you should report to Clavia.
Re: NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 16:57
by cavstef
Grazie di aver risposto. Passa direttamente da 0 a 100%. Quando si presenta il problema (non sempre accade) devo ritornare nel pannello Program/Pedal e inserire nuovamente "Yamaha FC7". Dopo aver fatto questa operazione funziona nuovamente. Questo pedale, che ho comprato tre mesi fa, è sempre stato utilizzato con la NS3 e ha sempre funzionato bene. Grazie
Re: NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 17:35
by Schorsch
cavstef wrote:Grazie di aver risposto. Passa direttamente da 0 a 100%. Quando si presenta il problema (non sempre accade) devo ritornare nel pannello Program/Pedal e inserire nuovamente "Yamaha FC7". Dopo aver fatto questa operazione funziona nuovamente. Questo pedale, che ho comprato tre mesi fa, è sempre stato utilizzato con la NS3 e ha sempre funzionato bene. Grazie
forum_rules.php … rule #4 3rd sentence
Re: NS4 bug? - control pedal periodically jumping to 100%
Posted: 07 May 2023, 20:41
by mrgkeys
I've posted this already. but in my case for the same problem with a new stage 4 compact, it was simply the brand new jacks need a couple of times of inserting the jacks in and pulling out, just exercising them. They dont break contact yet. And are also super stiff. Fixed it right up. I'm using the gain at 10 and I have 2 connected and they work fine.