Page 1 of 1
Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 05 Mar 2022, 05:40
by jjpolay
The sample editor no longer recognises my Nord Electro 5 HP when its connected, and I really need to upload samples for a gig! Please help!
We've tried a few things with no success, including:
- using different USB cables
- factory resetting the Nord via the Sound Manager software (we know the USB cable works because its connects to sound manager without a problem)
- using different computers / laptops
- reinstalled the drivers and sample editor software
- installing previous versions of the sample editor and software
- connecting the usb at different stages during power up
- refreshing the drivers
I'm running Windows 10 (x64) and haven't run into this issue before. Has anyone else ran into this problem?
Re: Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 05 Mar 2022, 06:21
by WannitBBBad
Hello, and welcome to the Forum! I'm not familiar with the problem you are having given your Electro is connecting fine to the Nord Sound Manager, however the Nord Sample Editor is not needed - you can upload/download samples directly with your Electo using the Nord Sound Manager. Open NSM, click on "Organize", select the Samples tab, and then drag-n-drop the files you need to load to your Electro to open sample locations. Good luck to you.
Re: Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 05 Mar 2022, 20:49
by Berretje
WannitBBBad wrote:...however the Nord Sample Editor is not needed - you can upload/download samples directly with your Electo using the Nord Sound Manager.
Unless he/she needs to create new sample files for his device
Re: Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 05 Mar 2022, 20:52
by Berretje
Hi and welcome!
You could use
USBDeview to uninstall the drivers for that specific vendorID.
1. Unplug your USB cable
2. Uninstall the Windows driver
3. Use USB Deview to uninstall the vendor specific (0ffc) software.
4. Reboot (just to be sure)
5. Install Windows drivers
6. Plug in Nord Electro (this will initialize the drivers again for the device.
Re: Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 07 Mar 2022, 22:14
by WannitBBBad
Berretje wrote:WannitBBBad wrote:...however the Nord Sample Editor is not needed - you can upload/download samples directly with your Electo using the Nord Sound Manager.
Unless he/she needs to create new sample files for his device
Good point
jjpolay, do you need to create samples or simply load them to your Electro? Have you had any luck trying the suggestions by Berretje?
Re: Help! Sample Editor doesn't recognise my Nord Elec 5 HP
Posted: 23 Jun 2023, 21:19
by danykeys
Hi,
You have to download the last update of the Nord Sample Editor, is the 4.20 Version!
This is the link:
https://www.nordkeyboards.com/downloads ... e-editor-4