Page 1 of 2

Light My Fire settings on E3

Posted: 23 Jan 2012, 19:45
by theGman
I did some searches and did not find anything; just curious if what you experienced users use as a good organ settings for the Doors, especially Light My Fire.

Thanks!

Re: Light My Fire settings on E3

Posted: 23 Jan 2012, 19:54
by Hanon_CTS
theGman wrote:I did some searches and did not find anything; just curious if what you experienced users use as a good organ settings for the Doors, especially Light My Fire.

Thanks!
Hello Gman,
This is the program that I used for it.
LightMyFire.nepg
(136 Bytes) Downloaded 1199 times
Cheers, Hanon

Re: Light My Fire settings on E3

Posted: 23 Jan 2012, 20:19
by anotherscott

Re: Light My Fire settings on E3

Posted: 23 Jan 2012, 20:33
by Hanon_CTS
I'll be interested in hearing how mine differs from theirs. :D

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 03:20
by theGman
Thank you for the info; unfortunately, my Apple computer can't open these programs. I was hoping someone just had the settings to adjust the keyboard without a download. Thanks.

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 03:40
by Hanon_CTS
Hi Gman,
The organ type is Vox.
Drawbar settings are: 88800756
Octave = Lo
No rotary speaker sim or vibrato
EQ:
Bass +7
Mid freq 2K
Mid level +5
Treble -4

Speaker sim= On Twin
Drive= 2
Reverb= Hall
Reverb amount = 3
Output= 6

Sometime back, I transcribed the Nord Vox and Farfisa Library for use with my NSEx
I created a spreadsheet and pdf of the settings. It can be found here:
http://www.norduserforum.com/nord-stage ... =vox#p3038
Hope this helps.
Cheers, Hanon

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 09:50
by Pismo
How do you decipher 88800756 ?

Why won't your apple download ? Nord not working with apple ?

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 11:59
by Johannes
Nord should work perfect with apple, are you sure you got all the necessary stuff installed? Check the newest version of the Nord Sound Manager and maybe its manual here: http://www.nordkeyboards.com/main.asp?t ... &osdwn=osx

Otherwise you could easily program the sound based on the settings Hanon posted. The values refer to the FX, EQ and other switches you should be able to find on your Electro.
The drawbar settings "88800756" are read from left to right and you should set them up using the Draw Buttons where 0 is completely off and 8 completely on, i.e., lit.
Check also here for another visualisation of such settings: http://www.drawbarsettings.com/songs.cf ... re&artist=

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 14:43
by Pismo
There are 9 drawbars and that is a set of 8 numbers.

Re: Light My Fire settings on E3

Posted: 24 Jan 2012, 16:33
by Hanon_CTS
Pismo wrote:There are 9 drawbars and that is a set of 8 numbers.
When the octave is set to low, you only have 8 to work with.