NW2 Pattern Pan and Ping Pong Delay
Posted: 12 Mar 2021, 12:10
When using arp pattern with pan right and ping pong delay there is NO delay.
1. Select an empty preset
2. Press Hold
3. Press Arp run then set it to master clk 1/8
4. Press Shift+Pattern in Arp section
5. Press Shift+Program Key 5
6. Delete all gates but keep the first.
7. Turn on delay, then set it to master clk 1/8d
8. Make that first gate pan right
9. Make it pan center.
10. Make it pan left.
11. You should have heard delay on the 3 pan positions.
12. Now turn on Ping Pong for the delay.
13. Set Pan to center.
14. Set Pan to right.
15. Why did the delay stop ?
16. Try alter the delay clk divisions. Nothing happens.
17. Turn of ping pong from delay.
18. Its a miracle, delay is back and at all clk divisions.
19. Now turn on ping pong again. whoa...delay is gone again.
Everyone who thinks this is normal, hands up
1. Select an empty preset
2. Press Hold
3. Press Arp run then set it to master clk 1/8
4. Press Shift+Pattern in Arp section
5. Press Shift+Program Key 5
6. Delete all gates but keep the first.
7. Turn on delay, then set it to master clk 1/8d
8. Make that first gate pan right
9. Make it pan center.
10. Make it pan left.
11. You should have heard delay on the 3 pan positions.
12. Now turn on Ping Pong for the delay.
13. Set Pan to center.
14. Set Pan to right.
15. Why did the delay stop ?
16. Try alter the delay clk divisions. Nothing happens.
17. Turn of ping pong from delay.
18. Its a miracle, delay is back and at all clk divisions.
19. Now turn on ping pong again. whoa...delay is gone again.
Everyone who thinks this is normal, hands up
