Page 1 of 1

Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 21 Jul 2020, 00:19
by whitenoise
Hi guys,

It looks like I have mod wheel calibration issue.

When I assign mod wheel morph to a volume control of any section it still produces sound.


Check the video.

It's running the latest OSv2.54
Nord stage 3 sw73 v3.0

Hopefully it's not a HW issue and can be easily fixed.

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 21 Jul 2020, 07:20
by maxpiano
You may want to take a look at this nord-stage-forum-f3/please-post-only-if ... 14534.html and similar older threads on this topic (a short list is here post113426.html)

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 21 Jul 2020, 08:36
by whitenoise
Thanks! It helps. I have contacted clavia. Will see what they propose to do.

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 21 Jul 2020, 10:36
by whitenoise
Update. Just softly nocked by hand the keyboard near the mod wheel. The issue is gone. It really looks like a HW issue.
Hopefully it's not happening again. Will keep my eye on the issue. Probably may need to fix it permanently some day.
Maybe Clavia could supply the guidlines for that.

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 25 Jul 2020, 08:17
by whitenoise
No miracle happened. Issue is back after going to a remote gig. It's certainly a HW issue. Hopefully someone has a manual how to fix it. Possibly loose connector.

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 25 Jul 2020, 10:08
by FZiegler
Did you already have a closer look into the thread Maxpiano mentioned? Would be nice if Clavia offered an instruction, but there is sort of a tutorial on the forum: nord-stage-forum-f3/please-post-only-if ... ml#p125824

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 25 Jul 2020, 23:04
by whitenoise
FZiegler wrote:Did you already have a closer look into the thread Maxpiano mentioned? Would be nice if Clavia offered an instruction, but there is sort of a tutorial on the forum: nord-stage-forum-f3/please-post-only-if ... ml#p125824
Thanks! Very helpful. I dropped an email to clavia as well. Let's see what I hear from them.

PS I have no issue to open NS and do any physical stuff that co could be required. Just want to be a bit more prepared.

Re: Nord Stage 3 SW73 Mod wheel calibration issue

Posted: 15 Aug 2020, 22:06
by whitenoise
The issue is fixed. Basically need to fix the physical position of the mod wheel. There is a small screw inside that controls the mod wheel position.