Nord User Forum

Discovered a while ago that no midi data was recorded in my DAW for the bass parts. Used Pedal Keys connected to the Bass Pedal input.
In the manual, it's stated that:
"MIDI Out
Both manuals, all knobs and buttons (Shift, Store and Master Level
excluded), pedal connector ports as well as the Bass Pedal input transmits
messages via MIDI Out."
And it does work, but only if you put the C2's Midi Control to "E".
However; This changes the trig mode from high_trig to velocity sensitive or "low_trig" for the great and swell manuals.

Anyone else try this?

Yes, I have struggled with this since 2010. When I upgraded to v1.32 the C2 stopped transmitting MIDI events from the pedalboard. I was advised from the support to set MIDI Local Control to 'E', but this setting was lost with power off.
Now, after setting Trigger mode to 'L', the C2 transmits the MIDI events, and the C2 remembers this setting. For me, this trigger mode is OK.

Best regards, Eskild

Thanks, Eskild!

I haven't tried the Low trig parameter, only setting MIDI to external.
It sort of defeats the purpose in my opinion, as I really want to use the Hi trig for those fast repeats:-)