All topics involving amplification and other accessories you are using with your Nord, and how all those things work together.

mixer table / mixer stand

Postby Elias » 24 Oct 2019, 22:43

Hey. I'm getting a Yamaha MG-06 for a live setup of two boards. Where do I put the mixer so its not in the way or anything?
My future Stage 3 Compact does not have extra room on the panel for a mixer. (neither do other keyboards)

I thought about a music stand with holes in it, so I could run cables through it. Good or bad idea?

Where do you keep your mixers and accessories?
Last edited by Elias on 24 Oct 2019, 22:54, edited 1 time in total.
Elias
Elias
 
Posts: 47
Joined: 29 Sep 2019, 09:29
Location: Finland
Country: Finland
Has thanked: 12 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 3

mixer table / mixer stand


Sponsor
 

Re: mixer table / mixer stand

Postby ajstan » 24 Oct 2019, 23:37

How much adjusting do you plan on doing during the gig? Are you using the headphone port or just sending to front-of-house?

I have a Key Largo mixer that I set before the gig and keep it on the floor. My Rolls PM55P headphone mixer can sit on top of my keyboard, be attached with Command Strips under my bottom keyboard or hook to my belt with a clip. I use it to adjust the level of my keyboards from the Key Largo and the monitor feed from the main board for vocals and other instruments.
NS3-88, NS3C, Radial Key Largo, Westone AM Pro 30 IEMs, Rolls PM55P Headphone Mixer, K&M 18880 Keyboard Stand, Bose S1 Pro, JBL 305p MKII Monitors, Zoom Q2n-4K

The author ajstan was thanked by:
Elias
User avatar
ajstan
 
Posts: 292
Joined: 12 Sep 2017, 14:16
Country: United States of America
Has thanked: 65 times
Been thanked: 104 times
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 3

Re: mixer table / mixer stand

Postby Schorsch » 24 Oct 2019, 23:38

Hi, this is how I do it:

CBA639D1-1DAB-4E72-9A51-FCA3424305CE.jpeg
CBA639D1-1DAB-4E72-9A51-FCA3424305CE.jpeg (422.26 KiB) Viewed 271 times


The stand is K&M Omega Red (18810) plus additional holder 18811 for a 2nd keyboard, I placed my Keylargo on the K&M laptop holder 18815 which can be mounted to the Omega Standard you can see at the left side. The Yamaha MG-06 should fit there as well
Last edited by Schorsch on 25 Oct 2019, 00:35, edited 2 times in total.
Regards Schorsch

The best in music is not in the notes.

Gear:
Nord Stage 3 Compact
Nord Stage 3 88
Nord Stage 2 EX 88
Yamaha Motif XF7 WH
Radial Key Largo
Neo Ventilator II
Hall of Fame 2
.... and more (GAS :roll: ) ...

The author Schorsch was thanked by 2 members, including:
EliasTracii
Schorsch
Patch Creator
 
Posts: 589
Joined: 15 May 2018, 23:34
Location: Germany - NRW - Viersen
Country: Germany
Has thanked: 323 times
Been thanked: 134 times
Your Nord Gear #1: Nord Stage 3
Your Nord Gear #2: Nord Stage 2 EX

Re: mixer table / mixer stand

Postby danrv » 25 Oct 2019, 14:24

Elias wrote:Hey. I'm getting a Yamaha MG-06 for a live setup of two boards. Where do I put the mixer so its not in the way or anything?
My future Stage 3 Compact does not have extra room on the panel for a mixer. (neither do other keyboards)

I thought about a music stand with holes in it, so I could run cables through it. Good or bad idea?

Where do you keep your mixers and accessories?


Hi
It’s a little pricey but this bracket would allow the MG-06 to be mounted on a mic stand.
https://www.thomann.de/gb/yamaha_bms10a.htm

A short, heavy stand would do like a K&M.
Nord Stage 2 HA76, Korg Triton Extreme 61, Roland XP80, Yamaha P140, Yamaha PSR2000 , 2 x Yamaha DXR10, Roland KC150, Toa D3 line mixer, Quiklok 2 tier X stand.

The author danrv was thanked by:
Elias
danrv
 
Posts: 381
Joined: 14 Feb 2014, 15:19
Location: Cambridge
Country: Great Britain
Has thanked: 28 times
Been thanked: 48 times
Your Nord Gear #1: Nord Stage 2

Re: mixer table / mixer stand

Postby Elias » 25 Oct 2019, 21:21

Schorsch wrote:The stand is K&M Omega Red (18810) plus additional holder 18811 for a 2nd keyboard, I placed my Keylargo on the K&M laptop holder 18815 which can be mounted to the Omega Standard you can see at the left side. The Yamaha MG-06 should fit there as well


I would do something like this, but I'm using a Quiklok X-stand (this model but it unlocks with the press of a button, not good). If I had a fitting stand for something like this, it would be the way to go.

I thought about the Yamaha mic stand – mixer -adapter but I don't know if I will upgrade my stand or find some other solution so I don't really want to invest so much on this. Its just a one job -gadget.
Elias
Elias
 
Posts: 47
Joined: 29 Sep 2019, 09:29
Location: Finland
Country: Finland
Has thanked: 12 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 3

Re: mixer table / mixer stand

Postby Elias » 25 Oct 2019, 21:25

ajstan wrote:How much adjusting do you plan on doing during the gig? Are you using the headphone port or just sending to front-of-house?


When I'm playing on a gig, I wont need to adjust anything but when rehearsing, I will need to adjust the mixer and use headphones. I also don't want to keep it on the floor, just so nobody steps on it and it does not suck all the possible dirt into its insides.
Elias
Elias
 
Posts: 47
Joined: 29 Sep 2019, 09:29
Location: Finland
Country: Finland
Has thanked: 12 times
Been thanked: 2 times
Your Nord Gear #1: Nord Stage 3


Return to Accessories and Amplification



Who is online

Users browsing this forum: No registered users and 0 guests