Nord User Forum

Any ideas about where to get a METAL replacement for the plastic NordPad Mount? The screw holes in the Gibraltar and Roland ones don't line up.

Cheers
T14

Yes, the ‘universal’ Gibraltar, Roland and Alesis plates all have the same size, but will not fit your Nord drum or pad.. I never came across one from another brand that does fit, I'd check the local metalworkers shop, smith (or whatever they are called), they should be able to replicate it, it's just a plate with 4 holes welded on a tube I'd say..

Good Morning,

I recently purchased a used ND1 which did not come with a mounting plate. I was looking a replacement online and found one at the link below. On the product page there is a downloadable spec sheet with the product dimensions so you can see if it will fit your device.

https://pintech.com/product/pintech-metal-module-mount/

Thank you,
DavevaD

Hi Dave,

That plate looks great! However, I checked the specifications and it is larger than the original mounting plate, the holes are too far apart, but perhaps you can drill new holes in it so that it fits the Nord drum, keep us posted..

Cheers,

Albert