Page 1 of 1
Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 28 Feb 2019, 05:04
by WannitBBBad
Below is a simple program for those of you who want the typical B3 key click to be set at "normal" but would like to have it stand out more in a song or two, or stand out a lot with a Keith Emerson solo. This uses the Synth to emulate the key click for when the note is played. The Synth and B3 levels are morphed to the Control Pedal. As the Leslie modifies the B3 key click, I used Chorus on the Synth key click so it's not the exact same sound for every note played. If you want it even closer, you can load the key click Synth in Slot B and route it through the Leslie too. I use the Amp/EQ to increase the key click volume (midrange works well) but the synth level set for the morph can be reassigned to your taste too. This is my default B3 with the drawbars morphed to the Mod Wheel for a bit of performance flexibility. Take care.
- B3 Key Click W.ns3f
- Stage 3 Program - Hammond B3 with Drawbars on Mod Wheel and Synth set for enhanced key click.
- (592 Bytes) Downloaded 849 times
Programs, MP3 examples, and links to many others
nord-stage-3-programs-ns3p-ns3pb-files- ... 15748.html
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 05 Mar 2019, 13:34
by davieh
Hi. I've downloaded your programme however when i drop it into the programme bank on NS3, I get a prompt telling me file not supported. Am i doing something wrong ?
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 05 Mar 2019, 13:49
by maxpiano
davieh wrote:Hi. I've downloaded your programme however when i drop it into the programme bank on NS3, I get a prompt telling me file not supported. Am i doing something wrong ?
.ns3f is a NS3 Synth file, not a Program, you need to load it using Synth tab of Nord Sound Manager
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 05 Mar 2019, 13:52
by davieh
Superb, thanks
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 06 Mar 2019, 06:01
by Nordmutt2
.ns3f is a Program file.
However, when I installed your 'program', there was not much organ volume. When I use the Wheel and Pedal, the drawbars came in thus increasing voluming.
Either way, I appreciated the 'click' in the synth section and made my own Organ program.
Thanks
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 06 Mar 2019, 09:35
by maxpiano
Nordmutt2 wrote:.ns3f is a Program file.
However, when I installed your 'program', there was not much organ volume. When I use the Wheel and Pedal, the drawbars came in thus increasing voluming.
Either way, I appreciated the 'click' in the synth section and made my own Organ program.
Thanks
Whoops... you're right, I probably misread it
(Synth programs should end with an "s", but so... shouldn't it be .ns3p?
)
Re: Hammond B3 - Enhanced Key Click - Drawbars on MW
Posted: 07 Mar 2019, 13:55
by WannitBBBad
Nordmutt2 wrote:...However, when I installed your 'program', there was not much organ volume. When I use the Wheel and Pedal, the drawbars came in thus increasing voluming.
Either way, I appreciated the 'click' in the synth section and made my own Organ program.
Thanks
That's interesting, I think you might have come across the same issue I had where the position of the control pedal wasn't being recognized by the B3 sometimes until the control pedal was moved. I posted it as a possible OS issue in the Stage forum at
nord-stage-forum-f3/new-os-2-10-bug-ini ... 17267.html - Thanks.