Page 1 of 1
Copying and pasting individual sounds to User Kit?
Posted: 07 Aug 2018, 14:25
by whitecat
Sorry if this is a stupid question... I like some of the individual sounds from the Factory Kits and would like to be able to copy and paste these sounds to my own User Kit. Is this possible at all?
Re: Copying and pasting individual sounds to User Kit?
Posted: 07 Aug 2018, 18:13
by wartaler
Hi whitecat,
I presume this is a question about the 3p,
Option 1:
Use Copy and Paste functions, see page 11 of the manual, you can copy the sound of one channel from one kit to another kit, first go to the channel (sound) that you want to copy, press Copy, then simply navigate to the other kit and destination channel and press Paste.
Option 2:
according to the manual you can store a drum sound in a user Drum bank (in case the drum sound is not in one of the factory Drum banks) after that you can select it from the Drum bank when you are assembling a kit, have a look at the ‘store drum’ and ‘drum select’ sections on page 6..
Cheers,
Albert
Re: Copying and pasting individual sounds to User Kit?
Posted: 09 Aug 2018, 02:20
by whitecat
wartaler wrote:I presume this is a question about the 3p
Yes!
wartaler wrote:
Use Copy and Paste functions, see page 11 of the manual, you can copy the sound of one channel from one kit to another kit, first go to the channel (sound) that you want to copy, press Copy, then simply navigate to the other kit and destination channel and press Paste.
This answered my question, I feel bad now, should've read the manual. THANKS!