Everything about the Nord Piano, Nord Piano 2, Nord Piano 3, and Nord Piano 4.

How do I record NP3 with UR22 audio interface?

Postby Sprenzy » 24 Jul 2018, 01:11

it's a bit confusing, I don't really know what it anything does like line output 1/l 2/r

midi in out

stuff like that however I want to record the piano as high quality as possible and make a midi strip as well.

do I use male 1/4 to male 1/4 or xlr (interface) to male 1/4 (keyboard)

and do I plug those in the line output at the back of the interface or the mic/line
Last edited by Sprenzy on 24 Jul 2018, 01:38, edited 1 time in total.
Sprenzy
 
Posts: 8
Joined: 18 Jul 2018, 19:38
Has thanked: 0 time
Been thanked: 0 time

How do I record NP3 with UR22 audio interface?


Sponsor
 

Re: How do I record NP3 with UR22 audio interface?

Postby Berretje » 24 Jul 2018, 06:38

Hi,

The question is a little bit fuzzy, but then again:

1. Get familiar with your instrument
2. Get familiar with midi
3. Get familiar with your audio interface and DAW
4. Get familiar with the difference between midi and audio
5. Come back when you have done bullet 1-4

Gr
Bart
Last edited by Berretje on 24 Jul 2018, 06:38, edited 1 time in total.
♫♪ ~ "That organ isn't humming; it's just on." ~♫♪
Coverband Blush | Soulband Turnback
NS2 | NE4D | Volume: ▁ ▂ ▃ ▄ ▅ ▆ █ 100 %
User avatar
Berretje
Patch Creator
 
Posts: 656
Joined: 09 Nov 2013, 00:48
Location: Eindhoven
Country: Netherlands
Has thanked: 333 times
Been thanked: 200 times
Your Nord Gear #1: Nord Stage 2
Your Nord Gear #2: Nord Electro 4

Re: How do I record NP3 with UR22 audio interface?

Postby Sprenzy » 24 Jul 2018, 15:17

Which cables do I use to record? 2 TS cables?
Last edited by Sprenzy on 24 Jul 2018, 15:18, edited 1 time in total.
Sprenzy
 
Posts: 8
Joined: 18 Jul 2018, 19:38
Has thanked: 0 time
Been thanked: 0 time

Re: How do I record NP3 with UR22 audio interface?

Postby baekgaard » 24 Jul 2018, 16:26

Yes, one for each channel FROM the NP3 audio out INTO the audio input on the front of your audio interface -- this will carry the audio (only).

Controlling the NP3 from your computer/DAW is probably easiest by connecting the NP3 via USB, since this gives you both input and output. If you want to use MIDI, you need two MIDI DIN cables; one FROM the UR22 midi out TO the NP3 midi in, and also FROM the NP3 midi out TO the UR22 midi in. Both UR22 MIDI connections are on the back.

Remember to select the correct audio inputs in your DAW (sequencer software) and also the connections to/from the instrument.

Enjoy :-)
baekgaard
 
Posts: 719
Joined: 14 Jul 2017, 11:32
Country: Denmark
Has thanked: 274 times
Been thanked: 359 times
Your Nord Gear #1: Nord Electro 6
Your Nord Gear #2: Nord Stage 3


Return to Nord Piano Forum



Who is online

Users browsing this forum: No registered users and 1 guest