Page 1 of 1

Restore of Stage 3 fail

Posted: 16 May 2018, 13:51
by Constantin
Hi everybody
I tried to restore my Stage 3. I did everything the way as it is in the description and in some videos on youtube where every step is explained. But after the restore process was finished, the synth samples and Piano sounds couldn't be found, so I can only play a few sounds with organ. The programs loaded but the sound is missing. It is also shown in the manager. Had anybody out there the same problem (and could solve it)?

Re: Restore of Stage 3 fail

Posted: 16 May 2018, 16:35
by baekgaard
Have you restore the piano samples/waveforms too? It looks like the programs reference (now non-existing) samples. Are the samples there?

Which firmware version are you using? The sound manager you're using is the latest one, that supports the new "numeric" mode (i.e. programs are called A:11, 12, 13, 14, 15, 21, 22, etc) -- this requires a very recent firmware on the NS3.

Is the backup you're trying to load from the same firmware, or from some older version?

Re: Restore of Stage 3 fail

Posted: 19 May 2018, 06:11
by derrellpiper
I restored the factory bank recently in a Stage 3 88.