Nord User Forum

Hello !

Have you ever got any difference when you assign the same sample (nsmp) to slot A and slot B ?
I find that the output sound from slot B is weeker and less rich in freqency that the one from slot A...

Is there something to do ?

Thanks !

pp3f4577

Did you start from an initiated patch? With a completely default patch, I would think there would be no differece. If you started by editing an existing patch, there may be settings affecting this.

Hello DJKeys !

Thanks for your reply. I'm just trying this out on my Nord Wave :
I switch to set Patch #39 -> wurlitzer
on slot A , by default, Patch #39 -> wurlitzer
on slot B, by default, Patch #39 -> wurlitzer

on slot A the sound is louder and bigger ....

What do you call a "completely default patch" ? How can I create one ?

Thanks again !

pp3f4577

This is from the manual:

Sound Init
By pressing the Sound Init button (Shift + Mono Mode buttons),
the settings of the Slot in focus will be initialized. This provides you with
a neutral starting point if you want to program a sound from scratch.
• The settings of the oscillator waveforms, oscillator mix and the program
effects will be excluded from the initialization. The effects will be
turned off for the Slot but the actual settings will not be changed.

Initialize both slots, then put the same waveform in each with the exact same settings.

-dj

Hi !

Thanks for the reply.
That's evidently the solution.
I'll keep it in my memory.

Thanks a lot !

pp3f4577