Page 1 of 1
Output Routing Mode PartL:L PartU:R with Rotary effect
Posted: 03 Sep 2016, 16:42
by iolli
I have an electro 5d and I was wondering if it is possible to set the Output Routing Mode to PartL:L - PartU:R with the Rotary effect enabled for both parts..
As soon as I enable the Rotary effect, both parts are routed trough the left output..
Re: Output Routing Mode PartL:L PartU:R with Rotary effect
Posted: 03 Sep 2016, 16:51
by jfenton
Maybe check to see if your rotory is applied to part both part U and Part L in Speaker/Comp section page 10.
http://www.nordkeyboards.com/sites/defa ... on%20D.pdf
Re: Output Routing Mode PartL:L PartU:R with Rotary effect
Posted: 04 Sep 2016, 07:51
by pablomastodon
iolli wrote:I have an electro 5d and I was wondering if it is possible to set the Output Routing Mode to PartL:L - PartU:R with the Rotary effect enabled for both parts..
As soon as I enable the Rotary effect, both parts are routed trough the left output..
No, it is not possible. Note that the same thing happens if you use those same audio routing settings and then set the EQ to both parts -- you will suddenly hear all signal through left output only and right output will be silent.
Bless, Pablo
Re: Output Routing Mode PartL:L PartU:R with Rotary effect
Posted: 08 Dec 2016, 03:37
by Dennisv
Is there any way to save the L R output for individual programs on Electro 5, or is it all or nothing kind of scenario and can only be changed or saved in the Global mode
Re: Output Routing Mode PartL:L PartU:R with Rotary effect
Posted: 08 Dec 2016, 03:40
by Dennisv
I want to split the signal and send organ to a Leslie 2101 mk ii but if I want
To switch a program and send the signal to the solid state bass amp I'll have to use an AB switch I guess