Nord User Forum

wanderjoe wrote:HI there,

First I want to thank you - I just have had my Stage 3 for less than a week and I am just blown away with this forum. I am very new and still learning my way around the unit - I was trying out this program and think I've loaded it correctly but when I try it I just sound above the split on those last few keys -any suggestions on what I may be doing wrong?

Thank you!

Hi Joe,

welcome to the forum!

I think the issue you are encountering is caused by the synth volumes which are morphed to the control pedal - have you connected one to the Stage 3? If so please move it to full volume and you should hear the sounds. If you do not have a control pedal just disable the control pedal morph on both panel A and panel B and move the synth volume up manually on both panels

crazydeep wrote:Hi there. Can Stage programs be "converted" and used on Electro keyboards?

"converted no, but you can load the ns3f file in the viewer tool to see the settings and try to reproduce it in your Electro. (with the limitation that the two gears are not the same of course). See my signature to access the tool online.

Adding here the output:

florence wrote:

crazydeep wrote:Hi there. Can Stage programs be "converted" and used on Electro keyboards?

"converted no, but you can load the ns3f file in the viewer tool to see the settings and try to reproduce it in your Electro. (with the limitation that the two gears are not the same of course). See my signature to access the tool online.

Adding here the output:

VH_Jump_v2_____W.png

Impressionant Florence, merci beaucoup !

Schorsch wrote:

wanderjoe wrote:HI there,
First I want to thank you - I just have had my Stage 3 for less than a week and I am just blown away with this forum. I am very new and still learning my way around the unit - I was trying out this program and think I've loaded it correctly but when I try it I just sound above the split on those last few keys -any suggestions on what I may be doing wrong?
Thank you!

Hi Joe,
welcome to the forum!
I think the issue you are encountering is caused by the synth volumes which are morphed to the control pedal - have you connected one to the Stage 3? If so please move it to full volume and you should hear the sounds. If you do not have a control pedal just disable the control pedal morph on both panel A and panel B and move the synth volume up manually on both panels

Thanks for clarifying Schorsch!

Hi Joe, most of my programs use the morph function with the Control Pedal, even if it's just for adjusting levels. As noted by Schorsch, to bypass the morph function, hold down the Morph Assign button for the Control Pedal and turn the synth Level dial down until the "To" value says "none" on the screen. I hope this helps, take care.

6 October Eddie van Hallen left us... Jumped into Heavens. RIP Eddie!!!!

Ivan Jochner wrote:6 October Eddie van Hallen left us... Jumped into Heavens. RIP Eddie!!!!

Truly an incredible guitar player.

WannitBBBad wrote: Hi Joe, most of my programs use the morph function with the Control Pedal, even if it's just for adjusting levels. As noted by Schorsch, to bypass the morph function, hold down the Morph Assign button for the Control Pedal and turn the synth Level dial down until the "To" value says "none" on the screen. I hope this helps, take care.

Thank you I'll try that. I did notice that if I removed the split it would work as well though would want to keep it for the high c. Thank you for all your posted work. A great way to learn.

6 October Eddie van Hallen left us... Jumped into Heavens. RIP Eddie!!!!

RIP Eddie, you had more to offer in this world...