List of Nord Stage 3 known issues/bugs

[alcools]

To Satomy: I don't have problems to control CC11 Ctrl pedal of the NS3 (0S 1.32) with my G2. I didn't try with the other ones.

[rsfelicio]

I’d like to see opinions for this two points.

- Rotary Speaker Stop when change a program - Maybe by Seamless transition, whem I move a Program with Rotary ON, to another with no Rotary the sounds for the first prog change, becouse the leslie goes to STOP Mode
In my opinion it’s important keep ALL components for the first sounds

- Up / Down pedal works different on PROG and SONG mode - In Prog mode, we can UP the programs allways to next, changing the Program and bank, but in song mode, we just can use the 5 Song parts ... I think could be important move to the next song .... equal Prog mode

[aureliopenna]

Hi
I've just received a Nord stage 3 in replacement of an Electro 5.
Is it normal to have a higher level of hiss from the headphones ? The volume knob doesn't affect the level of hiss. It's just there when the Nord is On, especially when the screen switch on. Using the same headphones, I've got no hiss from another device, like my sound card for instance. Could it be an OS issue ?
Thanks

Bah, this hiss is nothing my friend...
Try turning the piano equalization on the Briliant, then you will see what a real hiss is!

[aureliopenna]

I’d like to see opinions for this two points.

- Rotary Speaker Stop when change a program - Maybe by Seamless transition, whem I move a Program with Rotary ON, to another with no Rotary the sounds for the first prog change, becouse the leslie goes to STOP Mode
In my opinion it’s important keep ALL components for the first sounds

- Up / Down pedal works different on PROG and SONG mode - In Prog mode, we can UP the programs allways to next, changing the Program and bank, but in song mode, we just can use the 5 Song parts ... I think could be important move to the next song .... equal Prog mode

Fala mano, cê tá em qual cidade? Te mandar um privado pra gente poder conversar sobre o teclado, eu comprei um igualzinho, pode ser?Abraço.

[analogika]

I’d like to see opinions for this two points.

- Rotary Speaker Stop when change a program - Maybe by Seamless transition, whem I move a Program with Rotary ON, to another with no Rotary the sounds for the first prog change, becouse the leslie goes to STOP Mode
In my opinion it’s important keep ALL components for the first sounds

- Up / Down pedal works different on PROG and SONG mode - In Prog mode, we can UP the programs allways to next, changing the Program and bank, but in song mode, we just can use the 5 Song parts ... I think could be important move to the next song .... equal Prog mode

Fala mano, cê tá em qual cidade? Te mandar um privado pra gente poder conversar sobre o teclado, eu comprei um igualzinho, pode ser?Abraço.

Ich bin mir nicht ganz sicher, was uns der Autor damit sagen will.

ポルト語話せないよ。

[analogika]

Hi
I've just received a Nord stage 3 in replacement of an Electro 5.
Is it normal to have a higher level of hiss from the headphones ? The volume knob doesn't affect the level of hiss. It's just there when the Nord is On, especially when the screen switch on. Using the same headphones, I've got no hiss from another device, like my sound card for instance. Could it be an OS issue ?
Thanks

Bah, this hiss is nothing my friend...
Try turning the piano equalization on the Briliant, then you will see what a real hiss is!

That hiss is from the piano samples. It is the same on all other machines, as well, but due to the different output equalisation of the Stage 3, it is more noticeable at default settings.

[st2ex]

hello, I also encountered problems in my NS3 that I reported yesterday on the official website Nord and still had no response from the Nord assistance, in the meantime I also reported on the google sheet. I want to report here too the problems I encountered.
1- swell pedal and Ctrl pedal problem: If I use slot B in dual kB mode,the swell pedal does not work, it does not send midi parameters to the connected keyboard and destined for slot B, if I play the organ section directly on the NS 3, the Shell pedal works correctly.CTRL Pedal (EXpression) does not work, either in dual KB or directly on NS3.
2- Midi controls problem: MIDI CC 11 Ctrl Pedal (expression) and all effects controls from MIDI CC from 82 to MIDI CC 119 (enable 1, type eff1, source eff.1, amount eff.1, eff.1 rate, eff. 2 Type, etc. .. etc. .. etc. They do not work, NS3 does not receive the midi controls assigned by the midi keyboard in which it is connected.
have you found these problems too?

Same for me with OS 1.32.
CTRL pedal not working for Piano or Synth section. Organ is working.
Helmut

[Rafik]

Hi
I've just received a Nord stage 3 in replacement of an Electro 5.
Is it normal to have a higher level of hiss from the headphones ? The volume knob doesn't affect the level of hiss. It's just there when the Nord is On, especially when the screen switch on. Using the same headphones, I've got no hiss from another device, like my sound card for instance. Could it be an OS issue ?
Thanks

Bah, this hiss is nothing my friend...
Try turning the piano equalization on the Briliant, then you will see what a real hiss is!

That hiss is from the piano samples. It is the same on all other machines, as well, but due to the different output equalisation of the Stage 3, it is more noticeable at default settings.

Thanks
I didn't have this noise with the Electro 5. I don't have this noise from the other output of the Stage (CH1 OUT and CH2 OUT)
I recorded the sound there : https://www.dropbox.com/s/u68t4dhma7u8m ... T.WAV?dl=0
0 to 10 seconds, the recording cable is not plugged so we can hear the residual noise related to the cable or related to my digital recorder.
10 to 20 sec, the cable is connected on the headphone socket
20 to 30 sec, the cable is connected to the socket next to the headphone one (CH1 OUT)
30 to 40 sec, the cable is connected to the headphone socket of the NORD again
45 to 52 sec, the cable is connected to the elktron analog 4 headphone socket.
You need headphone to hear something...

[aureliopenna]

I’d like to see opinions for this two points.

- Rotary Speaker Stop when change a program - Maybe by Seamless transition, whem I move a Program with Rotary ON, to another with no Rotary the sounds for the first prog change, becouse the leslie goes to STOP Mode
In my opinion it’s important keep ALL components for the first sounds

- Up / Down pedal works different on PROG and SONG mode - In Prog mode, we can UP the programs allways to next, changing the Program and bank, but in song mode, we just can use the 5 Song parts ... I think could be important move to the next song .... equal Prog mode

Fala mano, cê tá em qual cidade? Te mandar um privado pra gente poder conversar sobre o teclado, eu comprei um igualzinho, pode ser?Abraço.

Ich bin mir nicht ganz sicher, was uns der Autor damit sagen will.

ポルト語話せないよ。

Oh Komm schon, Kumpel, nur ein bisschen Portugiesisch wird nichts für nichts machen, lol
ok ok, nicht mehr Portugiesisch oder Deutch hier. Entschuldigung, mein fehler!

[aureliopenna]

Hi
I've just received a Nord stage 3 in replacement of an Electro 5.
Is it normal to have a higher level of hiss from the headphones ? The volume knob doesn't affect the level of hiss. It's just there when the Nord is On, especially when the screen switch on. Using the same headphones, I've got no hiss from another device, like my sound card for instance. Could it be an OS issue ?
Thanks

Bah, this hiss is nothing my friend...
Try turning the piano equalization on the Briliant, then you will see what a real hiss is!

That hiss is from the piano samples. It is the same on all other machines, as well, but due to the different output equalisation of the Stage 3, it is more noticeable at default settings.

Indeed.