Diogo_piano wrote:I'll send an audio recording of the problem.
List of Nord Stage 3 known issues/bugs
-
- Posts: 7
- Joined: 18 Nov 2018, 03:09
- 5
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 2 EX
Re: List of Nord Stage 3 known issues/bugs
- Attachments
-
- Teste Italian Grand Faz XL.mp3
- Recording Italian Grand Faz XL
- (751.02 KiB) Downloaded 190 times
- Ivan Jochner
- Patch Creator
- Posts: 380
- Joined: 14 Aug 2018, 20:30
- 6
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Other Brand
- Location: Vinnitsa /Ukraine
- Has thanked: 116 times
- Been thanked: 284 times
- Contact:
Re: List of Nord Stage 3 known issues/bugs
But can you describe what is the issue with them???Diogo_piano wrote:Diogo_piano wrote:I'll send an audio recording of the problem.
Patchmaker
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
-
- Posts: 7
- Joined: 18 Nov 2018, 03:09
- 5
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 2 EX
Re: List of Nord Stage 3 known issues/bugs
The problem is when you play the Italian Grand FAz XL with the sustain pedal activated. sustain tuning is modifying the sound of the samples in these two notes F4 and F # 4 ...Ivan Jochner wrote:But can you describe what is the issue with them???Diogo_piano wrote:Diogo_piano wrote:I'll send an audio recording of the problem.
- Mr_-G-
- Moderator
- Posts: 4703
- Joined: 18 Aug 2012, 16:48
- 12
- Your Nord Gear #1: Nord Stage 2
- Has thanked: 1447 times
- Been thanked: 1255 times
Re: List of Nord Stage 3 known issues/bugs
Sounds like like a loop mismatch or some resonance during the sustain that interferes with the original sound.
It is noticeable in the 3rd and 4th notes of the mp3. I do not think you can do much about it other than reporting it to Clavia and hope they can/will edit the sample.
It is noticeable in the 3rd and 4th notes of the mp3. I do not think you can do much about it other than reporting it to Clavia and hope they can/will edit the sample.
-
- Posts: 154
- Joined: 14 May 2011, 18:55
- 13
- Your Nord Gear #1: Nord Stage 2
- Location: France
- Has thanked: 6 times
- Been thanked: 15 times
Ribbon to connector
As i open the NS3 to clean contacts (a lot of times...for all my Nords ) the ribbon to the mother board is very short and hard to reconnect..
a few centimeters more would be nice ...
a few centimeters more would be nice ...
- analogika
- Posts: 3343
- Joined: 21 Nov 2013, 10:02
- 10
- Your Nord Gear #1: Nord Electro 2
- Your Nord Gear #2: Nord Stage 3
- Has thanked: 1177 times
- Been thanked: 1447 times
Re: List of Nord Stage 3 known issues/bugs
The Stage 3 has been available for only 18 months...! What the hell are you doing that it requires cleaning the contacts already?
I’ve played maybe two hundred shows with my Electro 2, and it’s fourteen years old, and I’ve never once had to clean the key contacts...!
I’ve played maybe two hundred shows with my Electro 2, and it’s fourteen years old, and I’ve never once had to clean the key contacts...!
The Nord giveth; the Nord taketh away…
"The Angels of Libra are in the European vanguard of the [retro soul] movement“ (Bill Buckley, Soul and Jazz and Funk)
The Drawbars — off jazz organ trio
"The Angels of Libra are in the European vanguard of the [retro soul] movement“ (Bill Buckley, Soul and Jazz and Funk)
The Drawbars — off jazz organ trio
- Ivan Jochner
- Patch Creator
- Posts: 380
- Joined: 14 Aug 2018, 20:30
- 6
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Other Brand
- Location: Vinnitsa /Ukraine
- Has thanked: 116 times
- Been thanked: 284 times
- Contact:
Re: List of Nord Stage 3 known issues/bugs
Having had my NS3 compact from day one, i had to open it up and re-lubricate all squeaky Sharps, so the high chance of bad quality of shitty Fatar parts might be a case.analogika wrote:The Stage 3 has been available for only 18 months...! What the hell are you doing that it requires cleaning the contacts already?
I’ve played maybe two hundred shows with my Electro 2, and it’s fourteen years old, and I’ve never once had to clean the key contacts...!
Last edited by Ivan Jochner on 17 Feb 2019, 00:57, edited 1 time in total.
Patchmaker
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
- Ivan Jochner
- Patch Creator
- Posts: 380
- Joined: 14 Aug 2018, 20:30
- 6
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Other Brand
- Location: Vinnitsa /Ukraine
- Has thanked: 116 times
- Been thanked: 284 times
- Contact:
Re: List of Nord Stage 3 known issues/bugs
As a piano technician i can say there is nothing wrong with those notes played.Diogo_piano wrote:Diogo_piano wrote:I'll send an audio recording of the problem.
Even in real pianos with pedal depressed you hear the unison beats with sympathetic resonance of higher strings.
Last edited by Ivan Jochner on 17 Feb 2019, 00:59, edited 1 time in total.
- These users thanked the author Ivan Jochner for the post:
- analogika
Patchmaker
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
Nord Stage 3 Compact /Yamaha Motif XS 7
Yamaha MODX 7 / (past gear) Roland Integra
-
- Posts: 25
- Joined: 17 Feb 2019, 08:14
- 5
- Your Nord Gear #1: Nord Stage 3
- Has thanked: 2 times
- Been thanked: 5 times
Re: List of Nord Stage 3 known issues/bugs
Hello to all,
I am happy that I found this great forum. I am new to NORD, my NS3C baby is three days old. I read a lot in this forum and found in this topic (List of Nord Stage 3 known issues/bugs) also COPY/PASTE problem in OS2.0. I have OS2.02 and following issue:
I am copying a Program 1 to Program 5 with
1. holding MONITOR/COPY PANEL and pressing the Program 1 button (display: COPY TO CLIPBOARD)
2. holding SHIFT and pressing the MONITOR/COPY PANEL together with Program 5 button (display: PASTE FROM CLIPBOARD)
Result:
The Program 1 is not copyied to Program 5.
After pressing STORE button twice the Program 1 was copyied to Program 5 but without it's name.
This is not mentioned in User Manual and also the there is not an advice e.g. blinking STORE Led that an additional action is missing/necessary.....
Do you have also this issue?
[EDIT]: Now I see that there is a small symbol 'E' on the display when a Program was changed end not saved, so I am taking this point back. It remains that it is not mentioned in the actual User Manual (ver 1.6x).
I am happy that I found this great forum. I am new to NORD, my NS3C baby is three days old. I read a lot in this forum and found in this topic (List of Nord Stage 3 known issues/bugs) also COPY/PASTE problem in OS2.0. I have OS2.02 and following issue:
I am copying a Program 1 to Program 5 with
1. holding MONITOR/COPY PANEL and pressing the Program 1 button (display: COPY TO CLIPBOARD)
2. holding SHIFT and pressing the MONITOR/COPY PANEL together with Program 5 button (display: PASTE FROM CLIPBOARD)
Result:
The Program 1 is not copyied to Program 5.
After pressing STORE button twice the Program 1 was copyied to Program 5 but without it's name.
This is not mentioned in User Manual and also the there is not an advice e.g. blinking STORE Led that an additional action is missing/necessary.....
Do you have also this issue?
[EDIT]: Now I see that there is a small symbol 'E' on the display when a Program was changed end not saved, so I am taking this point back. It remains that it is not mentioned in the actual User Manual (ver 1.6x).
Last edited by paul42 on 21 Feb 2019, 10:15, edited 1 time in total.
-
- Posts: 25
- Joined: 17 Feb 2019, 08:14
- 5
- Your Nord Gear #1: Nord Stage 3
- Has thanked: 2 times
- Been thanked: 5 times
Re: List of Nord Stage 3 known issues/bugs
Working with the Sound Manager ver.7.42 and NS3C ver. 2.02, I see that the Organs are not correctly displayed in the Manager Info pane on right side:
The Pianos and Synth sounds are displayed correctly.
Is this an intention?
The Pianos and Synth sounds are displayed correctly.
Is this an intention?
Last edited by paul42 on 21 Feb 2019, 10:34, edited 1 time in total.