Nord User Forum

Thanks guys! My NS2 is just over a year old... And no, it hasnt got heavier! Lol. Anyways, i might give vacuum a go! I guess cleaning it once a year wouldnt be such a bad idea

Hello from Singapore! We do have quite a few bugs here too, but so far I find that covering your Nord when you're not using it is by far the best solution (prevention is better than cure). I personally wouldn't open up the Nord unless there is a problem or if you really know what you're doing. Doesn't really matter how clean it is on the inside as long as it works.

However, I do find that my keys are starting to become a little bit squeaky... I'm wondering whether some oil or such treatment will help. Does anyone have any clue?

Probably not oil. There is something called "lithium grease" or "white grease" (likely to be found in car spares shops) that is used for things with plastic. I am almost sure that my Yamaha P80 has this in the plastic key mechanisms and for certain in a Yamaha sustain pedal I have. I seem to remember reading -probably here- about the squeaky keys, so before using any lubricant, search the forum in case there is a better less risky solution.

Thank you all for your suggestions on this question. I gig outdoors, usually next to a road or sand dunes (slightly protected by tent walls), and when I get home I notice dust and grit on the keys. I was just wondering about what to use.

Marc Larochelle suggests a computer vacuum (similar to using compressed air in a can) and led me to this post. . https://www.mykeystomusic.com/pages/nor ... r-keyboard

Keep Clean / Dusted with Hardware Store Paint Brush and Maloney Gear Covers http://maloneystagegearcovers.com/
Gig Readied with Windex Wipes (to make keys grippy)
Occasional Can of Compressed Air in Garage or Outdoors