Nord User Forum

Klangwerk wrote: I have no software to monitor the Midi traffic, Sorry.

THX
helmuth

MidiOX on Windows and Snoize Midi Monitor on Mac OS are free softwares that can do MIDI monitoring

maxpiano wrote:

Klangwerk wrote:The setup. NS2 midi out --> Roland XV-3080 in, Midi Thru --> Roland D-05 Midi In, Midi Out --> Roland JD-08 Midi In
Channel 5 Channel 11 Channel 6


update: I connected the Roland JD-08 directly with the NS2. The same result with the JD-08! There is a sound, which is not included in the saved patch.

Have you tried to start from a blank (Init) program and then rebuild the 2 External sections settings? Or to put a computer between the NS2 and the JD-08 and monitor the MIDI traffic (to ensure the NoteOn messages are only on the desired channels)?

PS: I am assuming you have Global Channel set to OFF or USBxx on the NS2.

Hi maxpiano,

the initialfunktion is not working at all, doublestrange

I have changed the channel (Roland XV-3080) from 5 to 3. Now I can play the d-05 without the other tone. I don't understand why.

Klangwerk wrote:

maxpiano wrote:

Klangwerk wrote:The setup. NS2 midi out --> Roland XV-3080 in, Midi Thru --> Roland D-05 Midi In, Midi Out --> Roland JD-08 Midi In
Channel 5 Channel 11 Channel 6


update: I connected the Roland JD-08 directly with the NS2. The same result with the JD-08! There is a sound, which is not included in the saved patch.

Have you tried to start from a blank (Init) program and then rebuild the 2 External sections settings? Or to put a computer between the NS2 and the JD-08 and monitor the MIDI traffic (to ensure the NoteOn messages are only on the desired channels)?

PS: I am assuming you have Global Channel set to OFF or USBxx on the NS2.

Hi maxpiano,

the initialfunktion is not working at all, doublestrange

Are you pressing the SHIFT before the other Init Key (and keeping Shift pressed until you release the Init Key)?

However, reading your otehr message, there seem to be something to check across the MIDI channels configurations of all the devices involved in your setup, you shoudl check and list all their MIDI settings (global and parts) and ensure you have no unwanted overlaps.

Hi maxpiano,

I know to press the shift button like described in the manual.
It doesn't work.
However I checked all midi channels; there is everything on right position. I have the midi-ox but how can I switch the software between without interface?
Maybe I will keep it as it is now (with the changed channel in XV-3080) and see if the error occurs again.
Thank you all friends for your fast support.

Helmuth

Klangwerk wrote:Hi maxpiano,

I know to press the shift button like described in the manual.
It doesn't work.
However I checked all midi channels; there is everything on right position. I have the midi-ox but how can I switch the software between without interface?
Maybe I will keep it as it is now (with the changed channel in XV-3080) and see if the error occurs again.
Thank you all friends for your fast support.

Helmuth

Hello Helmut, sorry for that, but you never know if someone has ever used that function and some people get confused, so I preferred to remind it
anyway it cannot be normal that you cannot sound-init a Program on your NS2, that is very strange.

About MIDI Ox, without a MIDI Interface you can't unless you connect both NS2 and JD-08 via USB and make configurations/routings that way (i.e.same channels but via USB, even if this would be different than what you have today, but could be good just for testing)

However, if now it works for you just don't touch and enjoy!

Does the Shift key work in other combinations other the Init buttons?
And is it all 3 Init instruments (and Organ Split) that do not work?

Hi,

the shift key is working, but not in this function.

I tried with MIDI ox, but I connected via usb because lack of midi interface.
The signal is sending only on the channel 2 i set. Nothing else.

update:

I wrote Roland Support and they answered:

There is a bug with MIDI communication and MIDI channel 4/5. A solution is currently being worked on.
A release period of an update is currently not known.
We recommend checking the downloads section of the product page in the near future:
https://www.roland.com/global/products/jd-08/downloads/

Here original in german:

Roland Customer Support (Roland Corporation)


Hallo Herr Schicker,

vielen Dank für Ihre Anfrage.

Es liegt ein Bug mit MIDI-Kommunikation und MIDI-Kanal 4/5 vor. An einer Lösung wird derzeit gearbeitet.
Ein Releasezeitraum eines Updates ist aktuell nicht bekannt.

Wir empfehlen, in nächster Zeit den Downloadsbereich der Produktseite zu überprüfen:
https://www.roland.com/global/products/jd-08/downloads/


Best regards / Mit freundlichen Grüßen / Cordiali saluti
Roland Customer Support