Page 2 of 3
Re: Nord Mixer
Posted: 04 Dec 2020, 00:22
by Berretje
Netjes/nice!
Re: Nord Mixer
Posted: 04 Dec 2020, 07:25
by jamie8
Eriknie wrote:Just to share. I was using a Rolls PM351. Works great for my purpose, but needed extra functionality and used the mic input to hear my click send, and that was noisy because it is not designed for a line-level input.
My input needs:
- Stereo Keys 1 (Nord Stage 3)
- Stereo Keys 2 (Nord Wave 2)
- Mono Backing Track (from iPad left)
- Mono Click Track (from iPad Right)
- Stereo Aux mix from Main Desk with my own mix from rest of the band
Output:
- Stereo output to Main desk (Containing mix of keys + Backing track)
- mono Click to Main desk (contraining click only)
- Headphone (Mix of keys, aux-mix, click track)
I found this cheap mixer from Aliexpress:
With two of those I could make everything as i want it and put everything in a case with exact the wiring I want inside. Painted it Nord-red.
Nice Corona project....
Works great!
I've added an extra input.
The top 4 knobs control the main output mix:
- External input
- Backing track volume
- keys1 volume
- keys 2 volume
The bottom 4 knobs control the headphone mix:
- Main output mix (Keys)
- Mix from Aux
- Click track level
if you ever want to make another i would buy from you in a heartbeat . brilliant idea
Re: Nord Mixer
Posted: 04 Dec 2020, 10:05
by Tracii
jamie8 wrote:if you ever want to make another i would buy from you in a heartbeat . brilliant idea
So would I!
Re: Nord Mixer
Posted: 04 Dec 2020, 10:39
by Eriknie
Is is very simple to build one:
buy one or two of those mixers, buy a fitting box and connectors, drill some holes.
Spraypaint with a can and assemble.
Any configuration is possible that suits you.
I removed the connectors from the chinese mixers and soldered the wires directly on them to make sure there is a very good connection.
For most interconnections I used shielded wire and tried to connect all grounds to one point (star-ground)
Tried several adapters, some gave a buzz but i found 2 working.
They say 5V will work, with i found out that that reduces the headroom of the levels and I got distortion.
Now I use a 12V adapter. Absolutely noise-free and it even drives my AKG-K240 headphone that is hardly working from the NS3 output
Re: Nord Mixer
Posted: 04 Dec 2020, 13:36
by Mr_-G-
Brilliant idea. For a next version
could the the outputs be located one the side? That way one can use angled plugs. I do not know if there is enough space for that...
Re: Nord Mixer
Posted: 04 Dec 2020, 16:33
by Eriknie
Mr_-G- wrote: Brilliant idea. For a next version
could the the outputs be located one the side? That way one can use angled plugs. I do not know if there is enough space for that...
Yes, easier to insert when attached to the Nord!
My experience is that the the third time you get it right...
Re: Nord Mixer
Posted: 04 Dec 2020, 21:22
by jamie8
love your help but i still would prefer if someone else built it , im not inclined to do so myself but.... if you would be willing
Re: Nord Mixer
Posted: 06 Dec 2020, 18:40
by Normski
Hi Eriknie
Its a lovely thing.
Are you saying that it is an 8 input 4 output mixer.
Your input needs suggest you need 3 stereo and 2 mono input channels,
And 1 stereo and 2 mono outputs. Also is the headphone output powered.
Re: Nord Mixer
Posted: 07 Dec 2020, 13:52
by Eriknie
Normski wrote:Hi Eriknie
Its a lovely thing.
Are you saying that it is an 8 input 4 output mixer.
Your input needs suggest you need 3 stereo and 2 mono input channels,
And 1 stereo and 2 mono outputs. Also is the headphone output powered.
Headphone output is powered direct from the PCB mixer. Very strong output, even drives my hard to drive AKG headphone.
I have enough inputs and outputs with 2 internal mixers.
Re: Nord Mixer
Posted: 07 Dec 2020, 13:53
by Eriknie
jamie8 wrote:love your help but i still would prefer if someone else built it , im not inclined to do so myself but.... if you would be willing
Nope, I hardly have time to support my own hobbies...