Nord User Forum

Hi Darren,

Great performing!

There is a way to have 3 synths in a program to avoid cutting the sound when you change them. You just have to save the synth patches in consecutive order and then select them in the program while playing, rather than select the next program. It isn't always possible to achieve a good result, but mostly yes.

Ramon

Thanks for the advice, I'll have a play and see if that technique would work for this patch.

Any chance that these patches are also available for the Nord Stage Compact EX or any pointers on how to achieve the sound in the verse?

Good job. It appears that you have invested time and effort in creating this

Very Helpful, thanks....

Hello everyone. I don't own Nord but I need patches to perform this song. I own KORG PA 800 and midi with logic pro and I can't seem to find any patches to play this song. Any help? Thanks

The best I can do is break down each of the sounds so you may be able to recreate a similar program on your setup.

Intro / Verse
This is a Sync'd square wave with unison enabled (set to 2 oscillators) and a HP filter cut off at around 200Hz. To get the tremolo effect on the Nord, I passed it through the on board effects section as this allows me to bind the tremolo tempo to the Master Clock (handy in a live situation as the tempo can be tapped / re-tapped). Some synths provide LFO on the Amp section so you can get a similar effect there but whether you can easily adjust the tempo on the fly is a different matter

Bridge (1st verse)
This is just a hard attack strings sound. Layering a good strong pizzicato might be nice here here - I couldn't find one that really cut through the mix in the way I wanted so I opted for the String Orchestra from the Mellotron library. There's bound to be a handful of reasonable String samples on the Korg that would fit the bill.

Bridge (2nd + 3rd verses
Where in the first bridge we just have strings, the later bridges have everything going on. With the Nord, I combine the string sound for the 1st bridge with the Intro / Verse sounds. Notice on the video I roll the wheel up? This is actually bound to to the tremolo effect so that it becomes less aggressive.

Chorus
In the right hand is a strong hard attacking string sound - I used the same as I used for the bridge.
In the left hand I have a layer of the strings used in the right (but at a lower volume). Here I hit a limitation with the Nord, Ideally, I would have taken the square wave sound from the Intro and layered it over the strings in the left hand. However I needed the strings in the left hand to be quieter than the right otherwise the chords would overwhelm the staccato in the right hand. So, I 'approximated' a similar sound by using the organ section:
- Farfisa - Off, Off, On, On, On, Off, Off, Off, Off, leslie sim on slightly overdriven
- This is fed through the Tremelo effect (bound to the master clock) and then through a small amp simulator to lose excessive bottom end and make it sound a bit more 'synth'.
With your Korg, I expect you will have the flexibility to just use the square wave from the Intro, but I thought I'd explain this as others may find it interesting.

That's it. Sorry I can't give you a file that sorts this all out for you, maybe you could just buy a NS2? FWIW, I also now own a Korg Kronos and the one thing that limits it is the inability to easily share programs in the same way as we can here. Korg really need to sort this out.

Anyway, good luck and please let me know how you get on. If you have any questions on the above (like if I missed something), please let me know!

Still sounds great years later!

Any chance of a NSMP or NSPM3 format of the same three patches? <3 (just wanted to ask before I follow Darren's description above)

Thanks!

tonespam wrote:Still sounds great years later!
Any chance of a NSMP or NSPM3 format of the same three patches? <3 (just wanted to ask before I follow Darren's description above)
Thanks!

How about loading the Stage 2 programs in the Nord File Viewer and recreate the 3 sounds ?
Fireworks 2 should be straight forward as it uses the StringOrchestra sample (@Florence : strange the name doesn't appear, maybe it's not from the Nord Sample library ?).
For the other 2 programs, a bit tricker as both are based on the Synth engine but looking at the parameters (1 panel only), should not be impossible !

Fred

looking to find StringOrchestra_ _ste SRv5 for NS2
i have the nsmp3 format for NS3. but i’m on a rented NS2 here can anyone try to find me!!