Nord half moon switch for Nord Stage 2 (NS2) ?
- jaapb
- Posts: 33
- Joined: 05 Jan 2014, 22:41
- 10
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Stage 3
- Has thanked: 28 times
- Been thanked: 25 times
Nord half moon switch for Nord Stage 2 (NS2) ?
Hello,
Does anybody knows if the half moon switch will work on the NS2 ?
It doesn't matter if only slow and fast will work.
I'm thinking of buying a half moon switch and putting it with magnets on the front of my NS2.
Or mounting it on the NS2 like this: http://www.norduserforum.com/nord-elect ... 59-10.html
Thanks a lot for your reactions
Jaap
Does anybody knows if the half moon switch will work on the NS2 ?
It doesn't matter if only slow and fast will work.
I'm thinking of buying a half moon switch and putting it with magnets on the front of my NS2.
Or mounting it on the NS2 like this: http://www.norduserforum.com/nord-elect ... 59-10.html
Thanks a lot for your reactions
Jaap
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
I was thinking about using heavy duty Velcro. (If the half moon switch will work)... also thinking about trying the Half Moon (CU-?) model that HAMMOND uses for the XK3c. Somebody told me the Nord Half Moon switch did not work. I have NOT verified any of this yet, but I really miss my Half Moon switch for the speed control.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Spider
- Posts: 1127
- Joined: 06 Nov 2012, 12:26
- 11
- Your Nord Gear #1: Nord Stage 2 EX
- Your Nord Gear #2: Nord Wave
- Has thanked: 557 times
- Been thanked: 566 times
- Contact:
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
I have the Hammond CU-1 half moon and just tried it on my Stage2.
It works, with a few tweaks. It only switches between slow(stop) and fast, it will not operate the Stop Mode switch.
And you have to go to the System Menu and set :
Rotor/Latch Pedal Type to Closed
Rotor/Latch Pedal Func to Rotor Hold
My guess is that the Nord (or any other) half moon will work the same, with the possibile exception of the open/closed setting
It works, with a few tweaks. It only switches between slow(stop) and fast, it will not operate the Stop Mode switch.
And you have to go to the System Menu and set :
Rotor/Latch Pedal Type to Closed
Rotor/Latch Pedal Func to Rotor Hold
My guess is that the Nord (or any other) half moon will work the same, with the possibile exception of the open/closed setting
Last edited by Spider on 12 Jan 2017, 01:20, edited 1 time in total.
- FlametopFred
- Posts: 50
- Joined: 22 Nov 2016, 10:10
- 7
- Your Nord Gear #1: Nord Stage EX
- Location: Vancouver
- Has thanked: 34 times
- Been thanked: 9 times
- Contact:
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
wow - those are expensive.
I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.
I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.
- jaapb
- Posts: 33
- Joined: 05 Jan 2014, 22:41
- 10
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Nord Stage 3
- Has thanked: 28 times
- Been thanked: 25 times
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
I pay 80 euro for a used one. Also very expensive but I like to have a half moon switch from Nord.FlametopFred wrote:wow - those are expensive.
I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.
A new switch will cost here in holland about 150 euro.
- maxpiano
- Patch Creator
- Posts: 6301
- Joined: 27 Jun 2011, 13:29
- 12
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 451 times
- Been thanked: 2209 times
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
You could buy also one of Crumar's Half Moon switches (65€ New) from http://www.myrigshop.com (and rewire it, if needed, to make it work with NS)
Last edited by maxpiano on 13 Jan 2017, 11:21, edited 2 times in total.
- Berretje
- Moderator
- Posts: 1252
- Joined: 09 Nov 2013, 00:48
- 10
- Your Nord Gear #1: Nord Stage 2
- Your Nord Gear #2: Other Brand
- Location: Mierlo
- Has thanked: 1144 times
- Been thanked: 409 times
- Contact:
Re: Nord half moon switch for Nord Stage 2 (NS2) ?
Or when you are good with soldering electronics, you can make it yourself!jaapb wrote:I pay 80 euro for a used one. Also very expensive but I like to have a half moon switch from Nord.FlametopFred wrote:wow - those are expensive.
I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.
A new switch will cost here in holland about 150 euro.
http://www.norduserforum.com/topic11516.html
I've made one (my brother helped my with the soldering) myself using the scheme's that Steven has provided in the topic.
Works like a charm!
Gr
Bart
Gr Bart
Coverband Blush
Nord User Sounds - Program/Sample Collection[hr]
>> Check this awesome website to visually view the settings of your NS2/NS3 programs!
[hr]
Current gear
Nord Stage 2 HA88
Yamaha Tyros 5
Connected with a MioXM and powered by Bandhelper
Coverband Blush
Nord User Sounds - Program/Sample Collection[hr]
>> Check this awesome website to visually view the settings of your NS2/NS3 programs!
[hr]
Current gear
Nord Stage 2 HA88
Yamaha Tyros 5
Connected with a MioXM and powered by Bandhelper
-
- Posts: 1
- Joined: 26 Nov 2019, 22:21
- 4
- Your Nord Gear #1: Nord Stage 2