A wish for Nord Wave OS upgrade
-
- Posts: 3
- Joined: 06 Oct 2015, 01:15
- 8
- Your Nord Gear #1: Nord Wave
- Your Nord Gear #2: Nord Stage 2
- Been thanked: 1 time
Re: A wish for Nord Wave OS upgrade
Hello friends! just upgraded my nord wave, however the sustain pedal stopped working. someone went through something similar?
-
- Posts: 3
- Joined: 06 Oct 2015, 01:15
- 8
- Your Nord Gear #1: Nord Wave
- Your Nord Gear #2: Nord Stage 2
- Been thanked: 1 time
Re: A wish for Nord Wave OS upgrade
Last edited by tecladosalvador on 06 Oct 2015, 01:22, edited 1 time in total.
- Android
- Posts: 27
- Joined: 16 Aug 2011, 09:10
- 12
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
- Has thanked: 12 times
- Been thanked: 3 times
Re: A wish for Nord Wave OS upgrade
2015-10-07
The new OS v2.14 fixes a bug, introduced with the recently released v2.10, where sustain pedal would not function correctly
Thanks for the quick action on this!
The new OS v2.14 fixes a bug, introduced with the recently released v2.10, where sustain pedal would not function correctly
Thanks for the quick action on this!
Nord: Stage 3 88, Stage 3 Compact, C2, Wave 2, Lead 3, Lead 2X
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
- Android
- Posts: 27
- Joined: 16 Aug 2011, 09:10
- 12
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
- Has thanked: 12 times
- Been thanked: 3 times
Re: A wish for Nord Wave OS upgrade
Just installed 2.14.
Now my outputs are barely audible.
Sending another email to Nord.
Now my outputs are barely audible.
Sending another email to Nord.
Nord: Stage 3 88, Stage 3 Compact, C2, Wave 2, Lead 3, Lead 2X
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
- Android
- Posts: 27
- Joined: 16 Aug 2011, 09:10
- 12
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Wave 2
- Has thanked: 12 times
- Been thanked: 3 times
Re: A wish for Nord Wave OS upgrade
Everything is working with 2.14. Steffan from Nord was a great help. Turns out that when you install the new OS, your pedal functions reset, and my pedal changed to volume, instead of the morph that I had it set to. NORD and its customer service is amazing!
Nord: Stage 3 88, Stage 3 Compact, C2, Wave 2, Lead 3, Lead 2X
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
Yamaha: Montage 6, Reface CP
Dave Smith: Prophet 12
Moog: Voyager PE, Subsequent 37
Roland: Axis-1, TD-12KX, KC-880, KC-110
-
- Patch Creator
- Posts: 9
- Joined: 29 Mar 2015, 17:24
- 9
- Your Nord Gear #1: Nord Wave
- Has thanked: 1 time
- Been thanked: 1 time
Re: A wish for Nord Wave OS upgrade
Having spent some more time with the Wave, I still really need a deeper level of vibrato, it's very frustrating. I would like a few other things as well, in order of preference...
Please add some SYSTEM settings, that will not break patch compatibility, when the OS gets updated again, since that window has been opened recently.
1. Please add Vibrato Depth to the SYSTEM settings. I would like the Max depth to be at least double what the current default depth is, the Min could go down to none, so we can add subtle modulation if desired.
2. Please add a SYSTEM setting for Chorus Mix, so we can control how much of the Chorus effect to add to the original signal. It's a little heavy handed right now, for my tastes.
3. Please expand the SYSTEM Vibrato Rate, I'm not sure why it's currently so limited, open this rate for more creative purposes, maybe 0.2 to 20 Hz?
4. Please add a SYSTEM setting for Reverb Time Multiplier, so we can control the size of the rooms more. x0.2 to x2.0 should be good, where x1.0 is the default, where the algorithms are currently at. I'd like to use a bigger selection of smaller rooms, where the reverb adds more space than classic reverb.
5. Please add a SYSTEM setting for Delay Feedback Multiplier, so we have more control over feedback. x0.5 to 3.0 should be good, where we can get really long feedback if desired.
On my crazy wish list, add more filter types and use SYSTEM settings to exchange them out as needed. I'm trying to think of ways of using the SYSTEM settings so that patch compatibility is not impacted, because after all these years, it's pretty hard to change anything that impacts that.
Thanks!
Please add some SYSTEM settings, that will not break patch compatibility, when the OS gets updated again, since that window has been opened recently.
1. Please add Vibrato Depth to the SYSTEM settings. I would like the Max depth to be at least double what the current default depth is, the Min could go down to none, so we can add subtle modulation if desired.
2. Please add a SYSTEM setting for Chorus Mix, so we can control how much of the Chorus effect to add to the original signal. It's a little heavy handed right now, for my tastes.
3. Please expand the SYSTEM Vibrato Rate, I'm not sure why it's currently so limited, open this rate for more creative purposes, maybe 0.2 to 20 Hz?
4. Please add a SYSTEM setting for Reverb Time Multiplier, so we can control the size of the rooms more. x0.2 to x2.0 should be good, where x1.0 is the default, where the algorithms are currently at. I'd like to use a bigger selection of smaller rooms, where the reverb adds more space than classic reverb.
5. Please add a SYSTEM setting for Delay Feedback Multiplier, so we have more control over feedback. x0.5 to 3.0 should be good, where we can get really long feedback if desired.
On my crazy wish list, add more filter types and use SYSTEM settings to exchange them out as needed. I'm trying to think of ways of using the SYSTEM settings so that patch compatibility is not impacted, because after all these years, it's pretty hard to change anything that impacts that.
Thanks!
-
- Patch Creator
- Posts: 28
- Joined: 06 Sep 2013, 04:54
- 10
- Your Nord Gear #1: Nord Electro 6
- Your Nord Gear #2: Nord Modular
- Has thanked: 9 times
- Been thanked: 22 times
Re: A wish for Nord Wave OS upgrade
+1 !roberth909 wrote:1. Please add Vibrato Depth to the SYSTEM settings. I would like the Max depth to be at least double what the current default depth is, the Min could go down to none, so we can add subtle modulation if desired.
3. Please expand the SYSTEM Vibrato Rate, I'm not sure why it's currently so limited, open this rate for more creative purposes, maybe 0.2 to 20 Hz?
- alcools
- Posts: 210
- Joined: 06 May 2011, 18:12
- 13
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Modular
- Location: Paris
- Has thanked: 9 times
- Been thanked: 40 times
Re: A wish for Nord Wave OS upgrade
1. The filters of the NL4
2. Split
3. Assign morph to the aftertouch
4. Save vibrato rate in the patch (not in the system)
5. The same vibrato than the NL4
6. Same Reverb than the NL4
7. A reverb and delay for each SLOT, or at least, possibility to affect RVB and DLY to only 1 SLOT
8. A bit crusher (like NL4 !)
9. Arpegiator !!!
Simply add sample to the NL4 (and AT, and digital screen) !
But it's a request for a NW2 or NL5, not an upgrade !
2. Split
3. Assign morph to the aftertouch
4. Save vibrato rate in the patch (not in the system)
5. The same vibrato than the NL4
6. Same Reverb than the NL4
7. A reverb and delay for each SLOT, or at least, possibility to affect RVB and DLY to only 1 SLOT
8. A bit crusher (like NL4 !)
9. Arpegiator !!!
Simply add sample to the NL4 (and AT, and digital screen) !
But it's a request for a NW2 or NL5, not an upgrade !
Last edited by alcools on 28 Apr 2016, 19:46, edited 3 times in total.
Actual synth: Nord Modular G2 - Nord Stage 3 73 - Virus Ti2 - Peak - Prophet 6
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...
- alcools
- Posts: 210
- Joined: 06 May 2011, 18:12
- 13
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Modular
- Location: Paris
- Has thanked: 9 times
- Been thanked: 40 times
Re: A wish for Nord Wave OS upgrade
10. More sample memory
11. More samples in the NW (100 is not enought)
11. More samples in the NW (100 is not enought)
Actual synth: Nord Modular G2 - Nord Stage 3 73 - Virus Ti2 - Peak - Prophet 6
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...
Before: Nord Lead 3 & 4, Stage 1&2, Wave, Virus C, DSI Tetra, P12, and few others...