Hello everyone!
There was a problem: "piano flash error - initialization error 0". I went to the menu (shift + kbd split) ---> In the menu displayed on the screen, there is an option 3/10: "ERASE PNO FLASH MEMORY" - Press the key combination that is highlighted to confirm. However, this caused a message: "error". Now, the display shows this message. The shift+KBD split function is not working. It does not connect via USB. Maybe someone has a service manual? I'm not bad at repairing different synthesizers and other studio equipment. I've figured out which chip does what, but I can't fully understand everything without a diagram.
Thank you all for your responses!
Regards, Yuri
NE6D test no found, os not found
-
Reflection_void
- Posts: 2
- Joined: 28 Oct 2025, 23:50
- Your Nord Gear #1: Nord Electro 6
- Has thanked: 1 time
NE6D test no found, os not found
- Attachments
-
- IMG_20251029_001546_808.jpg (2.75 MiB) Viewed 160 times
-
Schorsch
- Moderator
- Posts: 2620
- Joined: 15 May 2018, 23:34
- 7
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 3
- Location: Germany - NRW
- Has thanked: 1499 times
- Been thanked: 953 times
Re: NE6D test no found, os not found
Hi and welcome to this forum!
I have never seen anyone having a Nord Service manual for the last couple of Nord instrument generations, so you would have to contact a Nord service center, typically the distributor for your country.
This looks like a faulty memory or controller on the mainboard. However, I would first try again to install the OS and the factory contents. Have you followed the troubleshooting advice in the Nord OS update instructions, to see if you can get a USB connection and reinstall the OS?
I have never seen anyone having a Nord Service manual for the last couple of Nord instrument generations, so you would have to contact a Nord service center, typically the distributor for your country.
This looks like a faulty memory or controller on the mainboard. However, I would first try again to install the OS and the factory contents. Have you followed the troubleshooting advice in the Nord OS update instructions, to see if you can get a USB connection and reinstall the OS?
- IMG_0934.jpeg (677.91 KiB) Viewed 147 times
- These users thanked the author Schorsch for the post:
- Reflection_void
Regards Schorsch
Check this https://chris55.github.io/ns3-program-viewer/ awesome tool to visualize NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, Uhl X4V-1, 2-manual HX3.4 organ made by Tastendoktor, SL88 Studio
Check this https://chris55.github.io/ns3-program-viewer/ awesome tool to visualize NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, Uhl X4V-1, 2-manual HX3.4 organ made by Tastendoktor, SL88 Studio
-
cphollis
- Posts: 1959
- Joined: 01 Mar 2013, 20:56
- 12
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Piano 5
- Location: Vero Beach, Fl
- Has thanked: 75 times
- Been thanked: 882 times
Re: NE6D test no found, os not found
Hi, and welcome!Schorsch wrote: ↑29 Oct 2025, 00:40 Hi and welcome to this forum!
I have never seen anyone having a Nord Service manual for the last couple of Nord instrument generations, so you would have to contact a Nord service center, typically the distributor for your country.
This looks like a faulty memory or controller on the mainboard. However, I would first try again to install the OS and the factory contents. Have you followed the troubleshooting advice in the Nord OS update instructions, to see if you can get a USB connection and reinstall the OS?
IMG_0934.jpeg
I had this error a long time ago on maybe an Electro 4? I had to do an OS install as well as all the libraries etc. It all came back, telling me that I had some sort of intermittent error that corrupted flash.
If that doesn't fix it, then it's hardware repair time -- probably a new main logic board required.
I think I have gear issues ....
-
Reflection_void
- Posts: 2
- Joined: 28 Oct 2025, 23:50
- Your Nord Gear #1: Nord Electro 6
- Has thanked: 1 time
Re: NE6D test no found, os not found
Thank you for your response!Schorsch wrote: ↑29 Oct 2025, 00:40 Hi and welcome to this forum!
This looks like a faulty memory or controller on the mainboard. However, I would first try again to install the OS and the factory contents. Have you followed the troubleshooting advice in the Nord OS update instructions, to see if you can get a USB connection and reinstall the OS?
Yes, I've tried this. There are no results. I've read the main memory (25Q064A), and it's readable. I've set the fuses and flashed the new flash memory, but the previous flash memory was damaged. I've also read the EEPROM, but I'm confused because the first line had a record, but the rest were 00 instead of FF. I don't know what to do. Does anyone have the 25A064A firmware?