Grand 2 - No MIDI Output

[basnettd]

Anyone suffered no MIDI output by virtue of a configuration error, (MIDI In works OK)?

Nord Tech Support (Jam Industries - Canada) kindly suggested this diagnostic checklist:

- confirm MIDI Out is enabled.

- ensure MIDI Output is set to "MIDI DIN" or "MIDI DIN + USB".

Note: there seems to be no way to access this system setting either on the Grand 2 console or via Sound Manager

THIS IS WHY WE ARE REACHING OUT TO THE FORUM FOR HELP

Are we missing something simple?

- MIDI Channel Assignment
Make sure the instrument is set to transmit on a valid MIDI channel (1–16). If set to “Off” or “Global Only,” it may not send data from the keyboard.

- Local Control. If Local Control is Off the keyboard won’t trigger internal sounds, but it should still send MIDI. However, some setups disable MIDI Out when Local is off—try toggling this setting.

- test with Another Device. Connect the Nord Grand 2’s MIDI Out to another MIDI-capable device (e.g., synth, MIDI interface). If the other device receives no signal, the issue is likely hardware or configuration.

- try a Factory Reset: Back up your programs and perform a reset using Nord Sound Manager

- ipdate or Reinstall OS: Re-flash OS version 1.22

At this point we believe we have a dead UART (Universal Asynchronous Receiver Transmitter) on the PCB even though the voltage between pins 4 & 5 is ~3VDC.

[FZiegler]

- confirm MIDI Out is enabled.

I don't have a Grand 2, but like you, I don't think the Grand 2 has this setting - it looks more as if the beginning of this checklist is a little outdated.

- ensure MIDI Output is set to "MIDI DIN" or "MIDI DIN + USB".

Former generations of Nords did have that setting, but newer models always run MIDI and USB at the same time. Did you, however, check with the USB cable unplugged?

- MIDI Channel Assignment
Make sure the instrument is set to transmit on a valid MIDI channel (1–16). If set to “Off” or “Global Only,” it may not send data from the keyboard.

There is only one channel on the Grand 2 for both In and Out. If In works, Out should do as well. What about USB MIDI data? Did you check with a MIDI viewer on your computer? Anything to be received?

- Local Control. If Local Control is Off the keyboard won’t trigger internal sounds, but it should still send MIDI. However, some setups disable MIDI Out when Local is off—try toggling this setting.

Local Off shouldn't have anything to do with that problem - in contrary, Local Off exists in order to control an external sound engine via MIDI.

- ipdate or Reinstall OS: Re-flash OS version 1.22

This could always be an idea. This item seems to be the only one that's model specific to the Grand 2.

[cphollis]

The menu to check MIDI settings is on page 29 of the manual: https://www.nordkeyboards.com/wt/docume ... tion-B.pdf

All Nords transmit midi by default unless it's turned off. Not something that "breaks" unless hardware gets damaged.

My guess is that it's something else: cable, midi receiver, wrong midi channel, etc.

[Pianoman23]

Did anyone figure out the Grand 2 midi out problem?... I poured over every possibility for a week... which is basically repeating (head bang against the wall) routines... please don't suggest updates or system reboots or midi pages... my tech has had it for a month now and been on the phone with Jam industries trying everything... now it's suggested to ship it back across the country... was SO hoping for an infantile (dumb guy) fix... yes??>.. no???

midi IN works fine... NO midi out... so frustrating.. brand new keyboard... anyone pursued the warranty angle?

cheers..

ps... I have 2 stage 4s and another nord grand and ALL work fine out of the box...ugh...