how do I power up a NS4 in test mode?
I need to check PB calibration...is there a document to be shared?
NS4 Test Mode ?
-
Mr. Marko
- Posts: 199
- Joined: 08 Mar 2009, 19:15
- 16
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Modular
- Has thanked: 9 times
- Been thanked: 47 times
NS4 Test Mode ?
NS4 / NS3 / NS-EX / Modular G1 / G2 / G2X / NL3
Basically Too Many Nords to Haul to a Gig
Basically Too Many Nords to Haul to a Gig
-
FZiegler
- Donator
- Posts: 2814
- Joined: 15 Dec 2019, 02:41
- 5
- Your Nord Gear #1: Nord Stage 3
- Location: Germany south-west
- Has thanked: 796 times
- Been thanked: 975 times
- Contact:
Re: NS4 Test Mode ?
As far as I understood, PB has been calibrated automatically during powering-up in the previous Nord models. That's what I'd expect for NS4 as well.
What exactly is your issue? You might need to check with national Nord support.
What exactly is your issue? You might need to check with national Nord support.
Stage-3-C (Rev.B 2.1) - Kawai VPC1 / Viscount Legend 70s / Yamaha CP33 - Hall of Fame & NeoVent2 - Behringer Flow-8 - K&M stands 18820+18811 / 18953+18952 - Samsung Tab S5e, MobileSheetsPro & AirTurn Duo200 - QSC K8.2s / Fischer InEars
-
Mr. Marko
- Posts: 199
- Joined: 08 Mar 2009, 19:15
- 16
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Modular
- Has thanked: 9 times
- Been thanked: 47 times
Re: NS4 Test Mode ?
PB stick likely needs replaced as it is not stable...I know how to do the swap...however my NL3 documentation has a full test mode by holding down buttons during power up and I suspect ALL Nord models have a similar routine if I can get access to a NS4 doc.
the NL3 routine has a full compliment of tests...panel switched / knobs / LEDs / PB sweep test that reveals all sins...
the NL3 routine has a full compliment of tests...panel switched / knobs / LEDs / PB sweep test that reveals all sins...
NS4 / NS3 / NS-EX / Modular G1 / G2 / G2X / NL3
Basically Too Many Nords to Haul to a Gig
Basically Too Many Nords to Haul to a Gig
-
ESFlash
- Posts: 24
- Joined: 16 Feb 2025, 22:53
- Your Nord Gear #1: Nord Stage 4
- Location: Under The X In Texas
- Has thanked: 1 time
- Been thanked: 6 times
Re: NS4 Test Mode ?
A few thoughts; in case you haven't already tried them:
1) vigorously exercise the PB stick back and forth
2) open the unit and reseat cables / connectors
3) Have you tried reinstalling the S4 Version 1.46 OS? -- just a few randumb thought that might help.
And, if/when you find the diagnostic mode keystroke sequence, please post it.
1) vigorously exercise the PB stick back and forth
2) open the unit and reseat cables / connectors
3) Have you tried reinstalling the S4 Version 1.46 OS? -- just a few randumb thought that might help.
And, if/when you find the diagnostic mode keystroke sequence, please post it.