Error code on Nord Rack 2
-
neglect_sound
- Posts: 1
- Joined: 07 Apr 2025, 04:33
- Your Nord Gear #1: Nord Lead 1/2/2x
Error code on Nord Rack 2
I have had this Nord Lead 2 for about 8 years that i purchased second hand. Recently i powered it up and this was on the display. No sound comes out of the unit. What should i do?
- Attachments
-
- 20241016_173920.jpg (3.41 MiB) Viewed 1963 times
-
sytsew
- Posts: 8
- Joined: 30 Mar 2016, 16:59
- 9
- Your Nord Gear #1: Nord Lead 1/2/2x
- Has thanked: 3 times
- Been thanked: 1 time
Re: Error code on Nord Rack 2
Just a few shots from the hip
1- When starting up, is there a moment the display shows something different than this ("8.8" I think to recognize), eg "1.06" and then "NL"? This would be the correct 2 displays during startup, first showing the firmware version (1.06 is the last) then a generic NL. After which you would get to the number of the last played preset.
2- If you push any of the buttons, like Octave Shift, the arrows left of the LCD or the ABCD slots, does any light come on and off?
3- If you select shift + any of the slot buttons (ABCD) or the three next to them, does anything happen?
If nothing happens that aligns with the manual, there might be a problem with the firmware or something else fundamentally. If something does work, you might get to level 1 in the debug game
1- When starting up, is there a moment the display shows something different than this ("8.8" I think to recognize), eg "1.06" and then "NL"? This would be the correct 2 displays during startup, first showing the firmware version (1.06 is the last) then a generic NL. After which you would get to the number of the last played preset.
2- If you push any of the buttons, like Octave Shift, the arrows left of the LCD or the ABCD slots, does any light come on and off?
3- If you select shift + any of the slot buttons (ABCD) or the three next to them, does anything happen?
If nothing happens that aligns with the manual, there might be a problem with the firmware or something else fundamentally. If something does work, you might get to level 1 in the debug game