Nord Drum 3P channel indicator
-
- Posts: 1
- Joined: 04 Feb 2025, 16:25
Nord Drum 3P channel indicator
Hi, when sequencing the 3P with an external midi device, the red triangle channel indicator is not visible. When I select a different channel, it indicates which channel I am on and then turns off. I had hoped to use the external midi device to change the channel but the triangle does not show at all unless you select the channel on the 3P itself. Is there any setting to leave this indicator turned on all the time?
-
- Moderator
- Posts: 765
- Joined: 19 Mar 2009, 18:32
- 15
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
- Has thanked: 88 times
- Been thanked: 225 times
Re: Nord Drum 3P channel indicator
Hi Analogger,
Not sure if 'Pad follow' mode works with incoming MIDI notes, from the manual: "Press the two CH SELECT buttons simultaneously to enter PAD FOLLOW mode, indicated by the Pad Follow led being lit. With Pad Follow active, striking any pad at high velocity will automatically make its Channel focused for editing, indicated by its PEAK/FOCUS led. "
You can also change the drum channel in focus with CC70 (MIDI), but that is the same as using the buttons on the unit, not very useful in your case I think.
Cheers,
Albert
Not sure if 'Pad follow' mode works with incoming MIDI notes, from the manual: "Press the two CH SELECT buttons simultaneously to enter PAD FOLLOW mode, indicated by the Pad Follow led being lit. With Pad Follow active, striking any pad at high velocity will automatically make its Channel focused for editing, indicated by its PEAK/FOCUS led. "
You can also change the drum channel in focus with CC70 (MIDI), but that is the same as using the buttons on the unit, not very useful in your case I think.
Cheers,
Albert
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular