This 'unofficial' Forum is dedicated to the Clavia Nord Keyboards, including the Nord Stage, Nord Electro and Nord Piano. Discuss any issues around Nord's keyboards, share your favorite patches, samples, and music. We are not affiliated with Clavia!
I noticed on my NE5D I could not access any more sample synth positions after C8 (vibes).
If I recall an existing program using e.g. F2 it's ok. It appears on the display and I can play it.
As soon I touch the encoder to browse other sounds, the display switches to position C8, and I am stuck again.
So, I have updated OS to the newest.
It all seemed working well, when, the day after, the same trouble again!
Not 100% clear if you are browsing Programs or Synth samples (since you put letters it seems the first case).
In both cases could be a faulty encoder that needs replacement, try to connect the NE to a computer and use Nord Sound Manager to check if all Program locations are not empty and use it lao select programs (or samples), if no problems using NUF but you cannot do the same on ME5 then a faulty encoder is likely.
maxpiano wrote: ↑09 Jun 2024, 14:19
Hi and welcome to NUF,
Not 100% clear if you are browsing Programs or Synth samples (since you put letters it seems the first case).
In both cases could be a faulty encoder that needs replacement, try to connect the NE to a computer and use Nord Sound Manager to check if all Program locations are not empty and use it lao select programs (or samples), if no problems using NUF but you cannot do the same on ME5 then a faulty encoder is likely.
I think instead he's referring to samples: infact in NE5 the synth samples after the number 99 are called with a letter and a number... A1, A2, A3... C1, C2... C8 (the indicted one) ... ecc...
So I think it's not an encoder problem (because it seems the encoder plays correctly scrolling through the programs), but a software problem... perhaps generated during a samples importing procedure.
I'd try with a factory reset (after a complete backup of programs and samples).
These users thanked the author ziberto for the post:
maxpiano wrote: ↑09 Jun 2024, 14:19
Hi and welcome to NUF,
Not 100% clear if you are browsing Programs or Synth samples (since you put letters it seems the first case).
In both cases could be a faulty encoder that needs replacement, try to connect the NE to a computer and use Nord Sound Manager to check if all Program locations are not empty and use it lao select programs (or samples), if no problems using NUF but you cannot do the same on ME5 then a faulty encoder is likely.
I think instead he's referring to samples: infact in NE5 the synth samples after the number 99 are called with a letter and a number... A1, A2, A3... C1, C2... C8 (the indicted one) ... ecc...
So I think it's not an encoder problem (because it seems the encoder plays correctly scrolling through the programs), but a software problem... perhaps generated during a samples importing procedure.
I'd try with a factory reset (after a complete backup of programs and samples).
OK, so it is Samples in fact (thanks for clarifying); nevertheless also on NE5 it is a different encoder than the Programs selection one, right?
In any case I agree that a Factory Reset would be a thing to try (having done a backup of current Programs before, of course)
These users thanked the author maxpiano for the post:
maxpiano wrote: ↑09 Jun 2024, 14:19
Hi and welcome to NUF,
Not 100% clear if you are browsing Programs or Synth samples (since you put letters it seems the first case).
In both cases could be a faulty encoder that needs replacement, try to connect the NE to a computer and use Nord Sound Manager to check if all Program locations are not empty and use it lao select programs (or samples), if no problems using NUF but you cannot do the same on ME5 then a faulty encoder is likely.
I think instead he's referring to samples: infact in NE5 the synth samples after the number 99 are called with a letter and a number... A1, A2, A3... C1, C2... C8 (the indicted one) ... ecc...
So I think it's not an encoder problem (because it seems the encoder plays correctly scrolling through the programs), but a software problem... perhaps generated during a samples importing procedure.
I'd try with a factory reset (after a complete backup of programs and samples).
OK, so it is Samples in fact (thanks for clarifying); nevertheless also on NE5 it is a different encoder than the Programs selection one, right?
In any case I agree that a Factory Reset would be a thing to try (having done a backup of current Programs before, of course)
Yes, the econders are different (correct precisation ).
I was wrong when I wrote the programs flowed correctly: the samples flow between 01 and C8 (according to what Fablues writes)... so I think it's not an hardware (encoder) problem.
Let's wait news from Fablues.
... and meanwhile I've no longer my nord electro 5, which I exchanged for a nord stage 3... with some coins, obviously!
I said that both for the record (and happiness ), both to communicate if Fablues asks me for some "live" verification, I can't longer do it.
), both to communicate if Fablues asks me for some "live" verification, I can't longer do it. 