Nord Stage 4 - Fuses and voltage change
-
dannymo
- Posts: 29
- Joined: 30 Jan 2012, 21:00
- 14
- Your Nord Gear #1: Nord Stage 4
- Location: San Francisco, CA
- Been thanked: 3 times
Re: Nord Stage 4 - Fuses and voltage change
I recently changed my NS4 from 220V to 110V and can confirm that a 0.3A fuse works perfectly at 110V.
-
magnetizado
- Posts: 10
- Joined: 23 Jan 2023, 23:00
- 3
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Nord Electro 6
- Location: Brazil
- Has thanked: 14 times
- Been thanked: 3 times
- Contact:
Re: Nord Stage 4 - Fuses and voltage change
maxpiano wrote:
Sure, the 300mA on 220V will not blow at power on, but it won't also if there would be a failure, in other words it will not do its job because it will need 2.5 the current to blow (compared to the nominal 125mA one).
Bottom line: better use the right one, always (so now you are OK with the combo 110V/300mA Fuse)
Perfect, it makes perfect sense. Thanks for the contribution.
-
agmiddlet
- Posts: 8
- Joined: 31 Jul 2023, 18:52
- 2
- Your Nord Gear #1: Nord Stage 4
- Has thanked: 4 times
Re: Nord Stage 4 - Fuses and voltage change
I am in the same situation
Last edited by agmiddlet on 27 Aug 2023, 21:42, edited 1 time in total.