NE6 - Square hole on the backside

Wolfgang T · Post by **Wolfgang T** » 07 Aug 2023, 20:51

I've just noticed that my NE6 has a square hole next to the monitor input that you can see through to the motherboard.

I'm wondering about the purpose of this hole, as I very much fear that dust and dirt could also get into the NE6.

(In the manual I did not find anything about it)

Post by **DJKeys** » 07 Aug 2023, 21:19

I have one both NS3 and NW2, looks like a portal for test equipment at the factory-

-dj

Wolfgang T · Post by **Wolfgang T** » 07 Aug 2023, 21:38

DJKeys wrote:I have one both NS3 and NW2, looks like a portal for test equipment at the factory-

-dj

Hlaalu · Post by **Hlaalu** » 07 Aug 2023, 22:16

Yes, it's used at the Nord factory to program and test things. Not meant to be used by the end owner.

Dust isn't more likely to get in there than it is from any other inlet, such as the audio outs.

Gambold · Post by **Gambold** » 10 Aug 2023, 19:19

It's for aliens. They can drive their saucers with a well-programmed Electro.

docbop · Post by **docbop** » 10 Aug 2023, 20:25

That's a jack for the Jazz Police to check the BS level what your playing.

Rusty Mike · Post by **Rusty Mike** » 10 Aug 2023, 22:10

docbop wrote:That's a jack for the Jazz Police to check the BS level what your playing.

I hope they never find me! Maybe I'd better seal up the port

Nord User Forum

NE6 - Square hole on the backside

NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside

Re: NE6 - Square hole on the backside