Hi everyone,
I have a nord Electro 6D with a midi IN, getting sequences from a Pyramid, and the MIDI OUT connected to a Streichfett. Streichfett is not getting any MIDI.The nord does.
Tryied the other way round and then could not make the Nord to play the sequence. Seems like the Streichfett has trouble with this, but the Nord should not have right?
I am configuring the channel correctly (Global) and send the midis to that channel from the sequencer. Or that's what I think. CC are in Send & Recieve but that's a different issue I assume.
Anyone had this problem?
Thank you, and take care!!
Julian
Nord Electro 6D MIDI problem
-
maxpiano
- Patch Creator
- Posts: 7326
- Joined: 27 Jun 2011, 13:29
- 14
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 561 times
- Been thanked: 2575 times
Re: Nord Electro 6D MIDI problem
Hi Julian and welcome,
The NE6 does not pass the MIDI data from IN to OUT (i.e. not Soft Thru) and neither the Streichfett does, so you have to connect the NE6 and Streichfett to two distinct OUTs of the Pyramid (say A for NE6 and B for Streichfett)
The NE6 does not pass the MIDI data from IN to OUT (i.e. not Soft Thru) and neither the Streichfett does, so you have to connect the NE6 and Streichfett to two distinct OUTs of the Pyramid (say A for NE6 and B for Streichfett)
Last edited by maxpiano on 23 Mar 2020, 16:28, edited 3 times in total.
-
Juli_M
- Posts: 2
- Joined: 23 Mar 2020, 16:14
- 6
Re: Nord Electro 6D MIDI problem
Hi max!
Thank you very much!
I feared so...shame.
We thought it could be like the Moog Subsequent 37 (we got midi out from there with the pyramid, so that would be a Soft Thru) We would have to get a splitter then.
Thanks again
Thank you very much!
I feared so...shame.
We thought it could be like the Moog Subsequent 37 (we got midi out from there with the pyramid, so that would be a Soft Thru) We would have to get a splitter then.
Thanks again