Electro 5d split mode for Doors tribute band
-
- Posts: 2
- Joined: 23 May 2023, 00:35
- 1
Electro 5d split mode for Doors tribute band
Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:
1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
Thank you very much for all your help
1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
Thank you very much for all your help
- Tasten-Bert
- Donator
- Posts: 864
- Joined: 17 Feb 2015, 11:57
- 9
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Other Brand
- Location: Where there is friendship, love and music ...
- Has thanked: 160 times
- Been thanked: 375 times
- Contact:
Re: Electro 5d split mode for Doors tribute band
Hi Maxterramax wrote:Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:
1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
Thank you very much for all your help
and a very warm welcome to this wonderful forum or nord enthusiasts.
As your points are concerned:
1. Yes
2. Yes
3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.
4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.
Good luck, and cheers from sunny Italy
| nord electro 5D 61 and korg X50 on k&m 18880 or 18950 stand | iPad mini 5 with Set List Maker | phonic AM120 submixer |
[hr]
... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20
[hr]
... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20
- maxpiano
- Patch Creator
- Posts: 6642
- Joined: 27 Jun 2011, 13:29
- 13
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 485 times
- Been thanked: 2330 times
Re: Electro 5d split mode for Doors tribute band
3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: noTasten-Bert wrote:3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.terramax wrote: 3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.
4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.
Last edited by maxpiano on 23 May 2023, 14:31, edited 8 times in total.
-
- Donator
- Posts: 121
- Joined: 28 Aug 2018, 23:09
- 6
- Your Nord Gear #1: Nord Stage 4
- Your Nord Gear #2: Other Brand
- Location: Newcastle England
- Has thanked: 62 times
- Been thanked: 53 times
Re: Electro 5d split mode for Doors tribute band
Hi Maxterramax wrote:Hi, my name's Max and I play organ and bass in a local Doors tribute band using two midi controllers and a laptop. I'm considering buying a Nord Electro 5D 61 to play it with my 37-key midi controller and, in split mode, play the Nord organ sound in the Electro and receive midi data from the controller for the bass sound. That way I'd get rid off the laptop and one of the midi controllers. I appreciate if you guys can help me with these questions:
1. Is it doable? I read that it can't be done with the Electro 6d.
2. Can I assign the sustain and the expression/volume pedal just for the organ or piano engine and not for the bass engine? Since I need to change the volume while soloing.
3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
Thank you very much for all your help
I know you have asked about an Electro 5 but i was sure it was also posible with a 6D.
So i have just set up my 6D to see if its posible.
1. Yes 6D works great with an ext KB for the lower part. I set up a bass.
2. Yes 6d each seperate control and sustain on/off.
3, Yes. After reading Berts post, I re read the manual 2.6, and still did not find any mention of output routing, So i checked and there is.
Its sytem menu page 16. main to left and organ to the right. actually this appears to be lower to the left, upper to the right.
So Bass to left and piano and/or organ to the right Is possible.
4. No
Cheers Norm
Heres a guide to setting up an ext kb.
Last edited by Normski on 26 May 2023, 12:41, edited 2 times in total.
-
- Posts: 2
- Joined: 23 May 2023, 00:35
- 1
Re: Electro 5d split mode for Doors tribute band
Thanks for your help. Can i replicate output routing with some sort of panning option?maxpiano wrote:3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: noTasten-Bert wrote:3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.terramax wrote: 3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.
4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.
- maxpiano
- Patch Creator
- Posts: 6642
- Joined: 27 Jun 2011, 13:29
- 13
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 485 times
- Been thanked: 2330 times
Re: Electro 5d split mode for Doors tribute band
Unfortunately not, there is no panning control on NE (you would have seen it mentioned in its manual, otherwise)
Last edited by maxpiano on 24 May 2023, 00:11, edited 1 time in total.
- Tasten-Bert
- Donator
- Posts: 864
- Joined: 17 Feb 2015, 11:57
- 9
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Other Brand
- Location: Where there is friendship, love and music ...
- Has thanked: 160 times
- Been thanked: 375 times
- Contact:
Re: Electro 5d split mode for Doors tribute band
Back to point 3 again:maxpiano wrote:3. unfortunately that's not what terramax asked, since Output routing on NE5 does not allow to separate piano from synth, only organ from piano+synth the answer is: noTasten-Bert wrote:3. Yes. Make PART LOWER the synth section with the bass sample selected and PART UPPER the organ or the piano with both SUSTPED and CTRLPED activated.terramax wrote: 3. Can I assign the bass sound to the left output and the organ or piano to the right output? That way, I can connect the left channel to a bass amplifier.
4. Can I power my midi controller with the USB port of the Electro?
4. I don‘t think so. Have never tried but have in mind that only the MIDI sockets supply energy, and here only 3.3 V instead of the 5 V specified by the MIDI rules.
4. confirmed, of course not, NE has only a "device" (type B) USB port and a USB "device" can only receive power, not provide it; only type A (USB Host) ports can provide power.
My answer „Yes“ was indeed given to what the OP asked, and my amendment was an additional info about how to organize the sound sections to achieve his goal. I should have added that in SYSTEM MENU on page 11 the output routing has to be set to LOWER = LEFT, UPPER = RIGHT, but I thought that everybody has already read the manual!
You need to know that NE5 has an output routing option different from NE6 - based on lower/upper instead of sound sections.
So, terramax, don‘t feel irritated, it will work.
Cheers from rainy Italy
Last edited by Tasten-Bert on 24 May 2023, 22:11, edited 1 time in total.
- These users thanked the author Tasten-Bert for the post:
- maxpiano
| nord electro 5D 61 and korg X50 on k&m 18880 or 18950 stand | iPad mini 5 with Set List Maker | phonic AM120 submixer |
[hr]
... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20
[hr]
... and I loved these of my former stuff: nord electro 3, Roland VR-760, Fatar Studio 1100, korg 01/W, Roland U-20
- ziberto
- Posts: 8
- Joined: 26 Sep 2022, 16:51
- 2
- Your Nord Gear #1: Nord Stage 3
- Has thanked: 16 times
- Been thanked: 3 times
Re: Electro 5d split mode for Doors tribute band
As nord electro 5 owner, I confirm what Tasten-Bert said: the output routing works exactly as terramax asked.
- These users thanked the author ziberto for the post:
- Tasten-Bert
- maxpiano
- Patch Creator
- Posts: 6642
- Joined: 27 Jun 2011, 13:29
- 13
- Your Nord Gear #1: Nord Stage 3
- Location: Italy
- Has thanked: 485 times
- Been thanked: 2330 times
Re: Electro 5d split mode for Doors tribute band
Ouch... I stand corrected!Tasten-Bert wrote:
Back to point 3 again:
My answer „Yes“ was indeed given to what the OP asked, and my amendment was an additional info about how to organize the sound sections to achieve his goal. I should have added that in SYSTEM MENU on page 11 the output routing has to be set to LOWER = LEFT, UPPER = RIGHT, but I thought that everybody has already read the manual!
You need to know that NE5 has an output routing option different from NE6 - based on lower/upper instead of sound sections.
So, terramax, don‘t feel irritated, it will work.
Cheers from rainy Italy
A shame then that on NE6 Output Routing was reverted back to the old "per Section" logic, NE5 is much more flexible in this way.
PS: yes we have a rainy May here
Last edited by maxpiano on 27 May 2023, 09:15, edited 3 times in total.
- maurus
- Posts: 463
- Joined: 26 Jun 2011, 11:34
- 13
- Your Nord Gear #1: Nord Electro 5
- Your Nord Gear #2: Other Brand
- Has thanked: 87 times
- Been thanked: 130 times
Re: Electro 5d split mode for Doors tribute band
Yes I agree. Add to that certain MIDI capabilities and a slightly different sound in the output stage. Perhaps we should establish a NE5 fan club here - count me inmaxpiano wrote: A shame then that on NE6 Output Routing was reverted back to the old "per Section" logic, NE5 is much more flexible in this way.
(Just joking, of course. But after I had NE5 and NE6 side by side for a while, I kept NE5 and sold NE6 again, since I did not need the things the 6 can do better than the 5.)