How to assign Pitch bender to wheel

[FrancescoFus]

Hello everyone! I wanted to ask you if there is a way to assign the pitch bender to the wheel?

[FZiegler]

Pitch bend is a thing on itself while the mod wheel is a control unit for morphing on Nord Stages. So what you can do with the mod wheel is subject to the morphing feature on your Stage 4 (?). The morphable parameters are listed on p. 38 of the manual. No pitch though. So the only option would be to set local off, create a MIDI loop and process MIDI values externally (computer?). But what for?

[WannitBBBad]

As noted by FZiegler, pitch isn't directly identified as a morphable parameter, however similar to the Stage 3, the settings of other synth parameters can allow pitch adjustment. I would suggest setting "Env to Pitch" and playing around with ENV AMT and OSC CTRL (both morphable parameters) to change the pitch with the Mod Wheel, Control Pedal, or AfterTouch. Unlike the pitch bar which can move either way from a centered position, you'll need to set up two morphs to bend the pitch up and pitch down (such as Mod Wheel for pitch up and Aftertouch for pitch down). Good luck to you.