Sustain synth sound after turned off
Sustain synth sound after turned off
Hello, I'm playing simple White Grand and I turn on some Strings on Synth layer A for the song chorus but want to turn the strings off again for verse 2. When I turn off the sample synth layer A it cuts off sharply and immediately but I want the currently playing sounds to decrescendo until silent but no new sounds to play. It's probably easy, thanks for your advice x
-
- Posts: 8
- Joined: 18 Jan 2022, 09:20
- 2
- Your Nord Gear #1: Nord Electro 6
- Has thanked: 2 times
- Been thanked: 4 times
Re: Sustain synth sound after turned off
I do not own a NP, but on my NE6 I would solve this with two presets (live or permanent) - one with White Grand only an one with same White Grand plus Synth Layer. Switching between provides a transient change of the sound.
Last edited by ggoebel on 19 Nov 2023, 09:26, edited 1 time in total.
Roland D-20 (1988) | Yamaha EMT-10 (1990) | Yamaha AvantGrand N3 (2013) | Nord Electro 6 HP73 (2021)
- Nordlicht
- Donator
- Posts: 454
- Joined: 11 Jan 2012, 09:17
- 12
- Your Nord Gear #1: Nord Piano 5
- Your Nord Gear #2: Nord Stage 4
- Location: Germany (Schleswig-Holstein)
- Has thanked: 248 times
- Been thanked: 208 times
Re: Sustain synth sound after turned off
Unfortunately this is the way things work in the NP5, I also complained about this once. It’s hard to understand why programs switch seamlessly, but turning off a layer cuts it off abruptly.LeeHux wrote:Hello, I'm playing simple White Grand and I turn on some Strings on Synth layer A for the song chorus but want to turn the strings off again for verse 2. When I turn off the sample synth layer A it cuts off sharply and immediately but I want the currently playing sounds to decrescendo until silent but no new sounds to play. It's probably easy, thanks for your advice x
In the Stage 4 it works the way one expects it, so Clavia should know how to to it. Perhaps there will be an update someday.
Nord Piano 5 + Nord Piano Monitors, Nord Stage 4 Compact + other stuff
https://soundcloud.com/spektralfarben
https://soundcloud.com/spektralfarben
- Eriknie
- Patch Creator
- Posts: 149
- Joined: 14 Jan 2014, 13:01
- 10
- Your Nord Gear #1: Nord Piano 5
- Your Nord Gear #2: Nord Stage 3
- Location: The Netherlands
- Has thanked: 29 times
- Been thanked: 110 times
- Contact:
Re: Sustain synth sound after turned off
I use and want this also, I have a solution for both the Stage 3 and Piano 5
For me it is important to sustain the layered sound, and when the sustain pedal is pressed, the sound also must continue, even if I disable the layered sound.
Only when I release the sustain pedal the sound must stop with the remaining sustain. Never abruptly.
On the Nord Stage 3 I solved this by using the same piano on both panels:
Panel A: Piano
Panel B: Piano (little bit brighter to cut through more) + strings, Modwheel to adjust volume
The strings (or Pad) will sustain, even the sustain pedal keeps the strings when moving from panel B to Panel A
On the Piano 5 I use two way to solve this:
Solution 1: switch between two synth layers, this will keep the sustain, even with sustain pedal
- Synth Layer 1: Strings
- Synth Layer 2: any sound with volume at 0 (default on)
Solution 2: Reset Synth layer by re-pressing preset
- Synth layers: any sound, but turned of. Enable when needed, reset by pressing preset again, also sustain pedal works
hope this helps. In the beginning I also thought that the Nord Piano was not able to do this...
For me it is important to sustain the layered sound, and when the sustain pedal is pressed, the sound also must continue, even if I disable the layered sound.
Only when I release the sustain pedal the sound must stop with the remaining sustain. Never abruptly.
On the Nord Stage 3 I solved this by using the same piano on both panels:
Panel A: Piano
Panel B: Piano (little bit brighter to cut through more) + strings, Modwheel to adjust volume
The strings (or Pad) will sustain, even the sustain pedal keeps the strings when moving from panel B to Panel A
On the Piano 5 I use two way to solve this:
Solution 1: switch between two synth layers, this will keep the sustain, even with sustain pedal
- Synth Layer 1: Strings
- Synth Layer 2: any sound with volume at 0 (default on)
Solution 2: Reset Synth layer by re-pressing preset
- Synth layers: any sound, but turned of. Enable when needed, reset by pressing preset again, also sustain pedal works
hope this helps. In the beginning I also thought that the Nord Piano was not able to do this...
NP5-73, NS3C
QSheets: The fastest sheet display tool in the world that plays Audio and send Program Changes: https://QSheets.eriknie.synology.me
FixLoop: Add Loop Points of Wav Files into the Nord Sample Editor: https://github.com/erik-nie/FixLoop-NSE
QSheets: The fastest sheet display tool in the world that plays Audio and send Program Changes: https://QSheets.eriknie.synology.me
FixLoop: Add Loop Points of Wav Files into the Nord Sample Editor: https://github.com/erik-nie/FixLoop-NSE
Re: Sustain synth sound after turned off
Thanks so much for your suggestions guys, I will experiment!