Nord User Forum

Hello,

Does anybody knows if the half moon switch will work on the NS2 ?
It doesn't matter if only slow and fast will work.

I'm thinking of buying a half moon switch and putting it with magnets on the front of my NS2.
Or mounting it on the NS2 like this: http://www.norduserforum.com/nord-elect ... 59-10.html

Thanks a lot for your reactions
Jaap

I was thinking about using heavy duty Velcro. (If the half moon switch will work)... also thinking about trying the Half Moon (CU-?) model that HAMMOND uses for the XK3c. Somebody told me the Nord Half Moon switch did not work. I have NOT verified any of this yet, but I really miss my Half Moon switch for the speed control.


Sent from my iPhone using Tapatalk

I have the Hammond CU-1 half moon and just tried it on my Stage2.
It works, with a few tweaks. It only switches between slow(stop) and fast, it will not operate the Stop Mode switch.

And you have to go to the System Menu and set :
Rotor/Latch Pedal Type to Closed
Rotor/Latch Pedal Func to Rotor Hold

My guess is that the Nord (or any other) half moon will work the same, with the possibile exception of the open/closed setting

Oké thanks a lot Spider for trying that out!

wow - those are expensive.

I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.

FlametopFred wrote:wow - those are expensive.

I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.

I pay 80 euro for a used one. Also very expensive but I like to have a half moon switch from Nord.
A new switch will cost here in holland about 150 euro.

You could buy also one of Crumar's Half Moon switches (65€ New) from http://www.myrigshop.com (and rewire it, if needed, to make it work with NS)

jaapb wrote:

FlametopFred wrote:wow - those are expensive.

I would pay $80 to $100 for those. But over US$250 is getting up there. Good looking product though.

I pay 80 euro for a used one. Also very expensive but I like to have a half moon switch from Nord.
A new switch will cost here in holland about 150 euro.

Or when you are good with soldering electronics, you can make it yourself!
http://www.norduserforum.com/topic11516.html

I've made one (my brother helped my with the soldering) myself using the scheme's that Steven has provided in the topic.
Works like a charm!

Gr
Bart

Hi!
find the results of this post here
http://www.norduserforum.com/nord-stage ... 12707.html

Use the Mod-Wheel as a half-moon-switch.